How to service and repair the rear brake pads of the disc brake system on 2008 Ford E-250?

Start the brake pad service and repair of disc brake rear system components by unscrewing the brake master cylinder cap while checking the fluid reservoir volume which should be at half capacity after draining excess fluid. The first step requires removing the wheel together with the tire. Position the caliper inside the C-clamp to push pistons into their housing then avoid using the sight hole as a tool as this could harm pistons and boots. You should carefully uninstall the two brake caliper anchor plate bolts then set the brake caliper and anchor plate assembly aside by supporting the caliper with mechanic's wire to stop it from hanging on the brake hose which poses a risk of damage. Proceed to take out the brake pads along with their four clips but discard the old clips when replacing the pads with new ones. At this time check brake pads for damage and contamination before performing any needed replacement. The installation procedure starts with reversing the reverse removal process while adding new brake pad clips if new brake pads need installation. Before braking again check the brake master cylinder reservoir then fill it with brake fluid which must comply with the manufacturer's guidelines before conducting a brake pump test for proper functioning. The installation of new brake shoes or pads at both ends of an axle will prevent uneven braking while you must be careful about brake fluid contact with painted and plastic surfaces because fluid contact needs immediate water cleaning.

OEM 2008 Ford E-250 Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Pads found

View related parts
2008 Ford E-250 Front Pads
Part Number: 8C2Z-2V001-D
$66.29 MSRP: $99.98
You Save: $33.69 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Brake Pads
- Replaces: BRSD-1328, 8C2Z-2V001-B
- Item Weight: 8.70 Pounds
- Item Dimensions: 2.5 x 6.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V001-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Brake Pads, Front
Part Number: 8C2Z-2001-C
$85.20 MSRP: $128.50
You Save: $43.30 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 2001
- Item Weight: 8.90 Pounds
- Item Dimensions: 4.2 x 4.9 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2001-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Brake Pads, Rear
Part Number: 8C2Z-2200-A
$79.06 MSRP: $121.67
You Save: $42.61 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Base No.: 2200
- Item Weight: 6.80 Pounds
- Item Dimensions: 4.1 x 4.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Rear Pads
Part Number: 8C2Z-2V200-D
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Brake Pads
- Replaces: 8C2Z-2V200-A, BR-1330
- Item Weight: 6.60 Pounds
- Item Dimensions: 10.2 x 6.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V200-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Front Pads
Part Number: 8C2Z-2V001-C
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Brake Pads
- Replaces: 8C2Z-2V001-A, BR-1328
- Item Weight: 7.90 Pounds
- Item Dimensions: 2.5 x 6.6 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V001-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Rear Pads
Part Number: 9C2Z-2V200-B
$66.29 MSRP: $99.98
You Save: $33.69 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pad - Brake; Brake Pads
- Replaces: 9C2Z-2V200-A, BRSD-1329
- Item Weight: 6.20 Pounds
- Item Dimensions: 2.6 x 6.5 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-2V200-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-250 Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-250 Brake Pads Parts Questions & Experts Answers

Q: How to service and repair the rear brake pads of the disc brake system on 2008 Ford E-250?
A: Start the brake pad service and repair of disc brake rear system components by unscrewing the brake master cylinder cap while checking the fluid reservoir volume which should be at half capacity after draining excess fluid. The first step requires removing the wheel together with the tire. Position the caliper inside the C-clamp to push pistons into their housing then avoid using the sight hole as a tool as this could harm pistons and boots. You should carefully uninstall the two brake caliper anchor plate bolts then set the brake caliper and anchor plate assembly aside by supporting the caliper with mechanic's wire to stop it from hanging on the brake hose which poses a risk of damage. Proceed to take out the brake pads along with their four clips but discard the old clips when replacing the pads with new ones. At this time check brake pads for damage and contamination before performing any needed replacement. The installation procedure starts with reversing the reverse removal process while adding new brake pad clips if new brake pads need installation. Before braking again check the brake master cylinder reservoir then fill it with brake fluid which must comply with the manufacturer's guidelines before conducting a brake pump test for proper functioning. The installation of new brake shoes or pads at both ends of an axle will prevent uneven braking while you must be careful about brake fluid contact with painted and plastic surfaces because fluid contact needs immediate water cleaning.