FordParts
My Garage
My Account
Cart
OEM 2009 Ford E-250 Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Pads found
2009 Ford E-250 Front Pads
Part Number: 8C2Z-2V001-D$66.29 MSRP: $99.98You Save: $33.69 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Lining; Brake Pads
- Replaces: BRSD-1328, 8C2Z-2V001-B
- Item Weight: 8.70 Pounds
- Item Dimensions: 2.5 x 6.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V001-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Brake Pads, Front
Part Number: 8C2Z-2001-C$85.20 MSRP: $128.50You Save: $43.30 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 2001
- Item Weight: 8.90 Pounds
- Item Dimensions: 4.2 x 4.9 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2001-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Brake Pads, Rear
Part Number: 8C2Z-2200-A$79.06 MSRP: $121.67You Save: $42.61 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Disc Brake Pad Set
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Base No.: 2200
- Item Weight: 6.80 Pounds
- Item Dimensions: 4.1 x 4.4 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Rear Pads
Part Number: 8C2Z-2V200-D$45.79 MSRP: $66.65You Save: $20.86 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pad - Brake; Brake Pads
- Replaces: 8C2Z-2V200-A, BR-1330
- Item Weight: 6.60 Pounds
- Item Dimensions: 10.2 x 6.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V200-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Front Pads
Part Number: 8C2Z-2V001-C$45.79 MSRP: $66.65You Save: $20.86 (32%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Lining; Brake Pads
- Replaces: 8C2Z-2V001-A, BR-1328
- Item Weight: 7.90 Pounds
- Item Dimensions: 2.5 x 6.6 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2V001-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Rear Pads
Part Number: 9C2Z-2V200-B$66.29 MSRP: $99.98You Save: $33.69 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Pad - Brake; Brake Pads
- Replaces: 9C2Z-2V200-A, BRSD-1329
- Item Weight: 6.20 Pounds
- Item Dimensions: 2.6 x 6.5 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-2V200-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-250 Brake Pads Parts Questions & Experts Answers
- Q: How to service and repair brake pads on 2009 Ford E-250?A: When repairing brake pads begin by using brake fluid that fulfills the manufacturer's criteria while discarding old fluid which could bring harm to braking components. Brake shoes or pads should replace as new units at both ends of an axle to maintain consistent braking performance. The brake master cylinder reservoir demands a fluid level check where fluid should be removed until the reservoir becomes half full. Start by removing the wheel followed by disconnection of the wheel speed sensor wiring harness from the brake flexible hose. Prying inside the sight hole of the caliper should be avoided since it could damage the pistons. The brake caliper must not rest when suspended from the flexible hose. Support the caliper with mechanic's wire while removing its guide pin bolts. Erase both brake pads before removing any present retraction clips for disposal of these clips. New brake pad installation requires utmost care to prevent pad lining material contamination by brake fluid and grease or oil and other substances. Fitting all hardware from the brake pad kit requires correct placement of anti-rattle clips into the anchor plate. Apply a C-clamp together with an outdated brake pad to force brake caliper pistons within the caliper while protecting both the caliper pistons and their boots. Apply specified grease into the rubber caliper sleeve boots before pad installation. Wires from the wheel speed sensor should be mounted onto the brake flexible hose. Begin wiggling the caliper by tightening the lower bolt before the upper bolt so the guide pins remain undamaged while maintaining proper placement of the caliper pin boots. When installing the brake caliper position the bolts using 37Nm torque while keeping the measurement to 27lb-ft. Before concluding install the wheel while filling the brake master cylinder reservoir with specified brake fluid and verifying correct brake function by applying the brakes several times.
Related 2009 Ford E-250 Parts
2009 Ford E-250 ABS Sensor
2009 Ford E-250 Brake Backing Plate
2009 Ford E-250 Brake Bleeder Screw
2009 Ford E-250 Brake Caliper
2009 Ford E-250 Brake Caliper Repair Kit
2009 Ford E-250 Brake Disc
2009 Ford E-250 Brake Dust Shields
2009 Ford E-250 Brake Line
2009 Ford E-250 Hydraulic Hose
2009 Ford E-250 Parking Brake Cable
2009 Ford E-250 Spindle Nut
2009 Ford E-250 Wheel Bearing Dust Cap