Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
2008 Ford E-250 Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford E-250 Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2008 Ford E-250?
A: The service procedure for headlamp bulbs begins by taking out the assembly of the headlamp. The bulb requires gentle handling since its pressurized gas can produce glass shattering when the envelope gets scratched or when drops and avoid base contact with hands. The bulb should stay in place up until the moment before replacing it because exposure beyond this point reduces performance and allows dust particles to accumulate on both lens and reflector surfaces. You must never activate the headlamps when removing the bulb. Reverse counterclockwise rotation of the bulb by one-eighth turn will allow removal of the bulb. Perform the opposite actions used for bulb removal to install it.