Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
2009 Ford E-250 Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-250 Headlight Bulb Parts Q&A
Q: How to Safely and Correctly Service the Front Headlight Bulb on 2009 Ford E-250?
A: The first step in servicing the headlamp bulb requires handling the bulb solely by its base due to pressure gas inside creating potential shattering when the glass envelope comes into contact with the surface. The bulb removal should be delayed until the moment before installing a new one in order to stop contaminants from entering the headlamp and causing performance problems. It is unsafe to activate the headlamps without an installed bulb. Start the procedure by taking out the headlamp assembly. To free the headlamp bulb users should turn the bulb in a counterclockwise direction one-eighth of the way. The new bulb installation requires performing the removal steps in the opposite order.