How to service the radius arm on 2008 Ford E-250?

The service procedure for radius arm begins with stripping off the front spring. When disconnecting the shock absorber from the radius arm keep in mind that you should tighten new connections to 80 Nm (59 lb-ft) torque. After removing and discarding the radius arm rearward nut and flag bolt you should reinstall them while applying torque to 350 Nm (258 lb-ft). The service of the radius arm requires you to take out its arm-to-axle nut and bolt and spring retainer and insulator while discarding these components. The technical tightening value during installation should be set to 300 Nm (221 lb-ft). Checking spring and radius arm insulators remains essential since replacements might be needed. Reverse the removal steps to finish installation while maintaining each torque value for the correct retention of components.

OEM 2008 Ford E-250 Radius Arm

Front Suspension Radius Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Radius Arms found

View related parts
2008 Ford E-250 Radius Arm, Front Passenger Side Part Number: BC2Z-3A360-B
$59.88 MSRP: $87.17
You Save: $27.29 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Right
- Position: Front Passenger Side
- Replaces: 8C2Z-3A360-BR
- Base No.: 3A360
- Item Weight: 19.90 Pounds
- Item Dimensions: 7.0 x 5.7 x 30.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-3A360-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Radius Arm, Front Driver Side Part Number: BC2Z-3A360-A
$55.42 MSRP: $80.67
You Save: $25.25 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Left
- Position: Front Driver Side
- Replaces: 8C2Z-3A292-BL
- Base No.: 3A360
- Item Weight: 19.60 Pounds
- Item Dimensions: 6.8 x 5.7 x 31.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-3A360-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-250 Radius Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Radius Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Radius Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-250 Radius Arm Parts Q&A

Q: How to service the radius arm on 2008 Ford E-250?
A: The service procedure for radius arm begins with stripping off the front spring. When disconnecting the shock absorber from the radius arm keep in mind that you should tighten new connections to 80 Nm (59 lb-ft) torque. After removing and discarding the radius arm rearward nut and flag bolt you should reinstall them while applying torque to 350 Nm (258 lb-ft). The service of the radius arm requires you to take out its arm-to-axle nut and bolt and spring retainer and insulator while discarding these components. The technical tightening value during installation should be set to 300 Nm (221 lb-ft). Checking spring and radius arm insulators remains essential since replacements might be needed. Reverse the removal steps to finish installation while maintaining each torque value for the correct retention of components.