How to remove and replace the front seat cushion on 2008 Ford E-250?

The front seat cushion process of removal and replacement begins by first making sure safety functions are operational then avoiding all tests on electrical pretensioner connectors because accidental deployments might result in fatal outcomes. Start by taking the seat out of its vehicle position. Adjust the lumbar support of the seat to its fully relaxed position before removing the adjustment knob from the area. The second step of the procedure requires users to unscrew the side shield screw situated below the lumbar adjust knob. The safety belt buckle and pretensioner become accessible after removing the rear screw from underneath the seat as well as the front screw and carefully pulling the cushion inboard side shield away from its position. Upward rotating the shield frees the rear pushpin mount which allows you to unclip the safety belt buckle and pretensioner boot retaining clips. It is necessary to separate the J-clips and release the hook-and-loop strips at the rear inboard of the cushion trim cover when the seat does not have a cushion inboard side shield. Similarly, the pin-type retainer needs to be removed. Seats with lumbar support require the disconnection of the cable after removing the two screws that hold the lumbar actuator. The cable then routes out from under the seat. Begin by unscrewing the mounting screw to the recliner handle followed by the screw that maintains the outboard sider shield of the cushion. Both fasteners are positioned under the seat near the seatback. You should remove both the front screw along with seat control switch electrical connector if the seat is powered and the cushion outboard side shield if the seat has manual track adjustment. After disconnecting all wire harness pin-type retainers that connect to the cushion frame operators should remove at least four seat track-to-cushion frame bolts with a torque setting of 25 Nm (18 lb-ft). Conclude the replacement by performing the steps in reverse order to install the new seat cushion.

OEM 2008 Ford E-250 Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Seat Cushions found

View related parts
2008 Ford E-250 Seat Cushion Pad, Rear Part Number: 8C2Z-1663840-A
$286.69 MSRP: $396.61
You Save: $109.92 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear; Seat Cushion
- Position: Rear
- Base No.: <63840
- Item Weight: 9.20 Pounds
- Item Dimensions: 70.4 x 23.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-1663840-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Seat Back Pad, Front Driver Side Part Number: 1C2Z-1564811-AA
$102.52 MSRP: $149.23
You Save: $46.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Base No.: 64811
- Item Weight: 3.30 Pounds
- Item Dimensions: 30.2 x 25.0 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-1564811-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Cushion Pad, Front Part Number: 1C2Z-15632A22-AA
$120.31 MSRP: $175.12
You Save: $54.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Foam, Front; Seat Cushion
- Position: Front
- Replaces: YC2Z-1563222-AA
- Base No.: 632A22
- Item Weight: 5.10 Pounds
- Item Dimensions: 24.2 x 22.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-15632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Cushion Pad, Front Center Passenger Side Part Number: YC2Z-15632A22-AA
$99.26 MSRP: $144.48
You Save: $45.22 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Cushion Foam, Center Right
- Position: Front Center Passenger Side
- Replaces: F7UZ-15632A22-BA, F7UZ-16632A22-AA, F6UZ-16632A22-BA
- Base No.: 632A22
- Item Weight: 3.30 Pounds
- Item Dimensions: 24.7 x 25.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC2Z-15632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Back Pad, Front Driver Side Part Number: 1C2Z-1564810-BA
$78.06 MSRP: $107.99
You Save: $29.93 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Base No.: 64810
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-1564810-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Cushion Pad, Rear Center Part Number: 8C2Z-1663840-B
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center, Rear; Seat Cushion
- Position: Rear Center
- Base No.: <63840
- Item Weight: 14.20 Pounds
- Item Dimensions: 59.7 x 34.7 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-1663840-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2008 Ford E-250 Seat Back Pad, Front Passenger Side Part Number: 1C2Z-1564810-AA
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Right
- Position: Front Passenger Side
- Base No.: 64810
- Item Weight: 8.30 Pounds
- Item Dimensions: 30.6 x 30.6 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-1564810-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Back Pad, Center Driver Side Part Number: 5C2Z-1664810-BA
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Center Left
- Position: Center Driver Side
- Base No.: <64810
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-1664810-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Back Pad, Rear Center Passenger Side Part Number: 5C2Z-1564810-AA
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Center Right
- Position: Rear Center Passenger Side
- Base No.: <64810
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-1564810-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Cushion Pad, Rear Center Driver Side Part Number: 3C2Z-15632A22-AA
Product Specifications
- Other Name: Pad; Seat Cushion Foam, Center Left
- Manufacturer Note: 2nd row , captains chair , driver side seat
- Position: Rear Center Driver Side
- Base No.: 632A22
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C2Z-15632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford E-250 Seat Back Pad, Front Passenger Side Part Number: 1C2Z-1564810-EA
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Right
- Position: Front Passenger Side
- Base No.: 64810
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C2Z-1564810-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2008 Ford E-250 Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-250 Seat Cushion Parts Q&A

Q: How to remove and replace the front seat cushion on 2008 Ford E-250?
A: The front seat cushion process of removal and replacement begins by first making sure safety functions are operational then avoiding all tests on electrical pretensioner connectors because accidental deployments might result in fatal outcomes. Start by taking the seat out of its vehicle position. Adjust the lumbar support of the seat to its fully relaxed position before removing the adjustment knob from the area. The second step of the procedure requires users to unscrew the side shield screw situated below the lumbar adjust knob. The safety belt buckle and pretensioner become accessible after removing the rear screw from underneath the seat as well as the front screw and carefully pulling the cushion inboard side shield away from its position. Upward rotating the shield frees the rear pushpin mount which allows you to unclip the safety belt buckle and pretensioner boot retaining clips. It is necessary to separate the J-clips and release the hook-and-loop strips at the rear inboard of the cushion trim cover when the seat does not have a cushion inboard side shield. Similarly, the pin-type retainer needs to be removed. Seats with lumbar support require the disconnection of the cable after removing the two screws that hold the lumbar actuator. The cable then routes out from under the seat. Begin by unscrewing the mounting screw to the recliner handle followed by the screw that maintains the outboard sider shield of the cushion. Both fasteners are positioned under the seat near the seatback. You should remove both the front screw along with seat control switch electrical connector if the seat is powered and the cushion outboard side shield if the seat has manual track adjustment. After disconnecting all wire harness pin-type retainers that connect to the cushion frame operators should remove at least four seat track-to-cushion frame bolts with a torque setting of 25 Nm (18 lb-ft). Conclude the replacement by performing the steps in reverse order to install the new seat cushion.