How to remove and replace the front seat cushion on 2009 Ford E-250?

Start by removing the front seat to continue the replacement process of the seat cushion. Start by relaxing the lumbar and unscrew the adjustable knob. The process for front seats with inboard side shields requires removing screws securing the shield before pulling it away from the seat until the safety belt buckle and pretensioner become accessible while detaching the shield from its rear pin-type retainer by rotating it upward. After installation of the pin-type retainer to the side shield always detach it before proceeding. Hold the cushion inboard shield while releasing the safety belt clips which also detach the pretensioner boot before removing the shield. Remove the pin-type retainer from the seats that lack inboard side shields by separating their J-clips and releasing the hook-and-loop strips from the rear inboard of the cushion trim cover. Equipments with lumbar adjusters require users to take out two screws followed by disconnecting the cable and marking the cable path for future installation. To proceed with the seat control switch electrical connector removal disconnect it from the connector position under the front frame area of the cushion while making note of the electrical wire harness pathway. First remove the outboard side shield together with its three screws followed by detachment of all pin-type wire harness retainers which connect to the cushion frame. The installation requires removing four cushion frame bolts which must be tightened to 25 Nm (18 lb-ft) before completing the procedure by reversing the removal steps.

OEM 2009 Ford E-250 Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Seat Cushions found

View related parts
2009 Ford E-250 Seat Back Pad, Front Driver Side Part Number: AC2Z-1564811-A
$168.43 MSRP: $259.92
You Save: $91.49 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Replaces: 9C2Z-1564811-A
- Base No.: <64810
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-1564811-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Cushion Pad, Rear Part Number: 8C2Z-1663840-A
$286.69 MSRP: $396.61
You Save: $109.92 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear; Seat Cushion
- Position: Rear
- Base No.: <63840
- Item Weight: 9.20 Pounds
- Item Dimensions: 70.4 x 23.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-1663840-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Cushion Pad, Front Part Number: 9C2Z-15632A22-A
$92.07 MSRP: $134.02
You Save: $41.95 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Cushion Foam, Front; Seat Cushion Pad, Front; Seat Cushion
- Position: Front
- Base No.: <632A22
- Item Weight: 4.40 Pounds
- Item Dimensions: 27.6 x 23.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-15632A22-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Back Pad, Front Passenger Side Part Number: AC2Z-1564810-A
$180.57 MSRP: $262.83
You Save: $82.26 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Right
- Position: Front Passenger Side
- Replaces: 9C2Z-1564810-A
- Base No.: <64810
- Item Weight: 7.00 Pounds
- Item Dimensions: 28.6 x 18.7 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-1564810-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Back Pad, Front Driver Side Part Number: AC2Z-1564811-B
$177.48 MSRP: $258.33
You Save: $80.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left
- Position: Front Driver Side
- Replaces: 9C2Z-1564811-B
- Base No.: <64810
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AC2Z-1564811-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Cushion Pad, Rear Center Part Number: 8C2Z-1663840-B
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Center, Rear; Seat Cushion
- Position: Rear Center
- Base No.: <63840
- Item Weight: 14.20 Pounds
- Item Dimensions: 59.7 x 34.7 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-1663840-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Back Pad, Center Part Number: AC2Z-1664810-A
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Center
- Manufacturer Note: RH/LH
- Position: Center
- Replaces: 9C2Z-1664810-A
- Base No.: <64810
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: AC2Z-1664810-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-250 Seat Cushion Pad, Front Center Part Number: 9C2Z-16632A22-A
Product Specifications
- Other Name: Pad; Seat Cushion Foam, Center
- Manufacturer Note: RH/LH
- Position: Front Center
- Base No.: <632A22
- Item Weight: 4.40 Pounds
- Item Dimensions: 27.3 x 22.7 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9C2Z-16632A22-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG

2009 Ford E-250 Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-250 Seat Cushion Parts Q&A

Q: How to remove and replace the front seat cushion on 2009 Ford E-250?
A: Start by removing the front seat to continue the replacement process of the seat cushion. Start by relaxing the lumbar and unscrew the adjustable knob. The process for front seats with inboard side shields requires removing screws securing the shield before pulling it away from the seat until the safety belt buckle and pretensioner become accessible while detaching the shield from its rear pin-type retainer by rotating it upward. After installation of the pin-type retainer to the side shield always detach it before proceeding. Hold the cushion inboard shield while releasing the safety belt clips which also detach the pretensioner boot before removing the shield. Remove the pin-type retainer from the seats that lack inboard side shields by separating their J-clips and releasing the hook-and-loop strips from the rear inboard of the cushion trim cover. Equipments with lumbar adjusters require users to take out two screws followed by disconnecting the cable and marking the cable path for future installation. To proceed with the seat control switch electrical connector removal disconnect it from the connector position under the front frame area of the cushion while making note of the electrical wire harness pathway. First remove the outboard side shield together with its three screws followed by detachment of all pin-type wire harness retainers which connect to the cushion frame. The installation requires removing four cushion frame bolts which must be tightened to 25 Nm (18 lb-ft) before completing the procedure by reversing the removal steps.