How to Service the Camshaft Position Sensor on 2008 Ford Edge?

A camshaft position (CMP) sensor replacement requires the removal of the air cleaner outlet pipe and assembly, disconnection of the CMP electrical connector, and the securing bolt. In attaching the new sensor, snug up the bolt to 10 Nm (89 lb-in) and apply clean engine oil to the O-ring seal and assemble again.

OEM 2008 Ford Edge Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Ford Edge Camshaft Position Sensor Part Number: AT4Z-6B288-A
$33.09 MSRP: $52.55
You Save: $19.46 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 7T4Z-6B288-A
- Base No.: 6B288
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-6B288-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport, Titanium | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2008 Ford Edge Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge Camshaft Position Sensor Parts Q&A

Q: How to Service the Camshaft Position Sensor on 2008 Ford Edge?
A: A camshaft position (CMP) sensor replacement requires the removal of the air cleaner outlet pipe and assembly, disconnection of the CMP electrical connector, and the securing bolt. In attaching the new sensor, snug up the bolt to 10 Nm (89 lb-in) and apply clean engine oil to the O-ring seal and assemble again.