FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2009 Ford Edge Expansion Tank Part Number: AT4Z-8A080-CA
$69.93 MSRP: $101.78You Save: $31.85 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Reservoir; Coolant Reservoir
- Replaces: 9T4Z-8A080-A, 7T4Z-8A080-A
- Base No.: 8A080
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.5 x 13.2 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-8A080-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir, specifically the degas bottle on 2009 Ford Edge?A: Start the repair process on the coolant reservoir's degas bottle only when the engine has cooled down because opening the cooling system produces steam and hot liquid with serious risk of personal injury. You should start by releasing pressure from the cooling system through careful counterclockwise rotation of the pressure relief cap by half a turn before you remove it. Hose clamp pliers enable clamping the lower degas bottle hose before using a suction device to drain coolant from the degas bottle. Place the degas bottle hoses out of the way before disconnecting the top and bottom hoses. Untighten the degas bottle-to-washer bottle bolt before removal but tighten it to 9 Nm (80 lb-in) torque when replacing it. To remove the degas bottle begin by unscrewing its two securing bolts before tightening them to 9 Nm (80 lb-in) when reinstalling. Put the procedures in reverse order to reinstall the degas bottle while filling it with recommended coolant mixtures to reach proper fill marks.