FordParts
My Garage
My Account
Cart
OEM 2008 Ford Edge Power Window Motor
Window Lift Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Power Window Motors found
2008 Ford Edge Window Motor, Front Part Number: 7T4Z-7823395-B
$145.99 MSRP: $231.82You Save: $85.83 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Right, Rear Left; Power Window Motor
- Manufacturer Note: Connectors Not Included
- Position: Front
- Base No.: <23394
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.7 x 3.9 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7823395-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Window Motor, Front Passenger Side Part Number: 7T4Z-7823394-B
$121.46 MSRP: $192.87You Save: $71.41 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Left, Front Right, Rear Right; Power Window Motor
- Position: Front Passenger Side
- Replaces: 7T4Z-7823395-A
- Base No.: <23394
- Item Weight: 2.50 Pounds
- Item Dimensions: 6.5 x 3.9 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7823394-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Window Motor, Front Driver Side Part Number: 7A1Z-5423395-A
$141.32 MSRP: $224.40You Save: $83.08 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Left; Power Window Motor
- Position: Front Driver Side
- Base No.: <23394
- Item Weight: 2.50 Pounds
- Item Dimensions: 6.2 x 2.9 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A1Z-5423395-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Right; Power Window Motor
- Position: Front Passenger Side
- Base No.: <23394
- Item Weight: 3.60 Pounds
- Item Dimensions: 23.9 x 3.1 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A1Z-5423394-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Edge Power Window Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Edge Power Window Motor Parts Q&A
- Q: How to service the rear door Power Window Motor and regulator on 2008 Ford Edge?A: The procedure to repair rear door motor and regulator starts by eliminating the back door speaker. You must provide window glass support before cutting the window regulator cable during a replacement of the new window regulator assembly. Test the window operation using the window control switch after reattachment. Delete the access plug but lower the window sufficient enough to access the glass clamp bolt while keeping the glass restrained by tape. The regulator should receive support before loosening the glass clamp bolt through the process which requires a tightening force of 9 Nm (80 lb-in) upon completion of reinstallation. Lower the window regulator until it stops at the bottom of the regulator tracks and then disconnect the B-pillar electrical connector. Move the two bolts securing the electrical harness grommet from the door and utilize the speaker hole for access to detach the clip that connects the harness to the door. Unclip the weather strip after feeding the wiring harness between the weather strip and door edge gap. Proceed to take out door latch screws before tightening them to 12 Nm (9 lb-ft) during reinstallation. Detach the access plug which serves the latch side of the door before removing the outside door handle reinforcement screw and finally the handle. At installation time the screw requires tightening to 8 Nm (71 lbs-in). When a vehicle has the keypad feature it needs to be removed before using a Torx T20 tool to disconnect the nine bolts securing the rear door module for removal. You must transfer key parts before installing the module with 9 Nm (80 lb-in) torque. The installation process ends with executing the reverse steps needed to complete the installation.