How to service the heater core on 2008 Ford Escape?

A leak test should be performed first and only approved coolant is allowed for the car while servicing the heater core. Service of the heater core starts by uninstalling the heater core housing with evaporator core together with the dash panel gasket. The service process starts by eliminating the heater core bracket screw followed by the heater core bracket. During reinstallation keep the bracket screw tightened to 3 Nm (27 lb-in). The heater core replacement process should start with heater core reinstallation using the reverse method.

OEM 2008 Ford Escape Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Heater Core found

View related parts
2008 Ford Escape Heater Core
Part Number: H2MZ-18476-Z
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core
- Replaces: 8L8Z-18476-A, HC-50
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-18476-Z
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Escape Heater Core

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Heater Core Parts Questions & Experts Answers

Q: How to service the heater core on 2008 Ford Escape?
A: A leak test should be performed first and only approved coolant is allowed for the car while servicing the heater core. Service of the heater core starts by uninstalling the heater core housing with evaporator core together with the dash panel gasket. The service process starts by eliminating the heater core bracket screw followed by the heater core bracket. During reinstallation keep the bracket screw tightened to 3 Nm (27 lb-in). The heater core replacement process should start with heater core reinstallation using the reverse method.