How to service the front cross-member for transmission support on 2008 Ford Expedition?

Start servicing the transmission support crossmember by using a hoist while positioning the transmission in neutral position. Protection should be removed from the skid plate before you detach its fasteners and the skid plate itself. The service begins with left-hand and right-hand exhaust heat shield-to-crossmember fastener detachment but the transmission mount nuts require removal before installation. You must tighten these nuts to 76 lb-ft (103 Nm). Place support underneath the transmission to denote the position of the crossmember relative to the frame bracket edge that will serve as a reference for correct rejoining. It is essential to orient the crossmember nuts so they face forward towards the vehicle. disconnect and remove the two bolts on each side while removing the transmission crossmember until you reinstall it at 90 Nm (66 lb-ft). To finish the installation reverse all previously executed steps.

OEM 2008 Ford Expedition Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Front Cross-Members found

View related parts
2008 Ford Expedition Repair Kit Part Number: 9L3Z-5025-A
$80.77 MSRP: $117.57
You Save: $36.80 (32%)
ADD TO CART
Product Specifications
- Other Name: Crossmember; Frame Crossmember
- Base No.: 5L005
- Item Weight: 6.20 Pounds
- Item Dimensions: 28.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-5025-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Frame Assembly Part Number: FL1Z-5005-H
$3008.07 MSRP: $4456.40
You Save: $1448.33 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: AL1Z-5005-D, FL1Z-5005-D, EL1Z-5005-D
- Item Weight: 644.80 Pounds
- Item Dimensions: 24.4 x 11.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FL1Z-5005-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Frame Assembly Part Number: FL1Z-5005-E
$2975.14 MSRP: $4407.62
You Save: $1432.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Frame Rail
- Replaces: 7L1Z-5005-E, 9L1Z-5005-AC, AL1Z-5005-A, FL1Z-5005-A, EL1Z-5005-A, 7L1Z-5005-JC
- Item Weight: 632.40 Pounds
- Item Dimensions: 23.5 x 11.6 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FL1Z-5005-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Frame Assembly Part Number: FL1Z-5005-F
$2917.10 MSRP: $4321.63
You Save: $1404.53 (33%)
Product Specifications
- Other Name: Frame Rail
- Replaces: AL1Z-5005-B, FL1Z-5005-B, EL1Z-5005-B
- Item Weight: 663.40 Pounds
- Item Dimensions: 23.9 x 11.7 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FL1Z-5005-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Frame Assembly Part Number: FL1Z-5005-G
Product Specifications
- Other Name: Frame Rail
- Replaces: 7L1Z-5005-LC, AL1Z-5005-C, 9L1Z-5005-CC, EL1Z-5005-C, FL1Z-5005-C, 7L1Z-5005-G
- Item Weight: 663.40 Pounds
- Item Dimensions: 23.9 x 11.4 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FL1Z-5005-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Front Crossmember Part Number: 7L1Z-7810414-A
Product Specifications
- Other Name: Member Assembly - Floor Cross; Floor Pan Crossmember, Front; Support
- Position: Front
- Base No.: <10414
- Item Weight: 10.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-7810414-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Ford Expedition Front Cross-Member

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Expedition Front Cross-Member available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Expedition Front Cross-Member as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Expedition Front Cross-Member Parts Q&A

Q: How to service the front cross-member for transmission support on 2008 Ford Expedition?
A: Start servicing the transmission support crossmember by using a hoist while positioning the transmission in neutral position. Protection should be removed from the skid plate before you detach its fasteners and the skid plate itself. The service begins with left-hand and right-hand exhaust heat shield-to-crossmember fastener detachment but the transmission mount nuts require removal before installation. You must tighten these nuts to 76 lb-ft (103 Nm). Place support underneath the transmission to denote the position of the crossmember relative to the frame bracket edge that will serve as a reference for correct rejoining. It is essential to orient the crossmember nuts so they face forward towards the vehicle. disconnect and remove the two bolts on each side while removing the transmission crossmember until you reinstall it at 90 Nm (66 lb-ft). To finish the installation reverse all previously executed steps.