Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Cross Member Assembly; Floor Pan Crossmember, Center, Front, Front Forward; Center Crossmember
Position: Front
Replaced by: FL3Z-1510692-C
Replaces: FL3Z-1510692-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2018-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Member Assembly - Floor Cross; Floor Pan Crossmember, Front; Support
Position: Front
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2007-2017 Ford Expedition | Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Ford Expedition Front Cross-Member
Welcome to our website where you can discover high-quality, genuine Ford Expedition Front Cross-Member. We offer an extensive inventory of OEM Ford Expedition Front Cross-Member at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to service the front cross-member for transmission support on Ford Expedition?
A: To service the transmission support crossmember, raise the vehicle with transmission in the neutral. Take out the Exhaust Heat Shield fasteners and the skid plate and the transmission mount nuts (tighten to 103 Nm when reattaching). Install the crossmember in the proper position, take away the crossmember bolts and refit and tighten to 90 Nm.
Q: How to service and repair the front cross-member on Ford Expedition?
A: In order to service the transmission support crossmember, make sure that the vehicle is in neutral position on a hoist. Unscrew the skid plate, Exhaust Heat Shield fasteners and the transmission mount nuts (tighten to 103 Nm when reinstalled). Indicate the crossmember where it is to fit, get the crossmember bolts loosened and refitted, tightening to 90 Nm.