How to service and repair the windshield washer pump on 2008 Ford Expedition?

Service and repair of the windshield washer pump requires one to examine the product label information for warnings then obtain medical guidance regarding emergency care. The Material Safety Data Sheet (MSDS) should be consulted to prevent serious personal injury because improper instruction observance. Damage to the windshield washer pump seal must be avoided during servicing and operating the pump without reservoir fluid will cause premature pump failure. Starting with RH headlamp assembly removal users should Position the shield aside when needed to reach the washer pump. Disconnect all components which drive the windshield washer reservoir hoses and electrical connector from the windshield washer pump before finally removing the unit. The installation procedure of the new pump follows the steps of reversing the removal sequence.

OEM 2008 Ford Expedition Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Pumps found

View related parts
2008 Ford Expedition Washer Pump Part Number: 7R3Z-17664-A
$21.27 MSRP: $34.31
You Save: $13.04 (39%)
ADD TO CART
Product Specifications
- Other Name: Motor And Pump Assembly; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump
- Replaces: 6F1Z-17664-A
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-17664-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Washer Pump, Front Part Number: 7L2Z-17664-A
$21.49 MSRP: $34.13
You Save: $12.64 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor And Pump Assembly; Windshield Washer Pump, Front; Washer Pump Repair Kit; Pump Reservoir; Front Washer Pump; Rear Washer Pump; Windshield Washer Pump
- Manufacturer Note: Dual Outlet
- Position: Front
- Replaces: 6F9Z-17664-A
- Base No.: 17664
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.3 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-17664-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Ford Expedition Washer Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Expedition Washer Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Expedition Washer Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Expedition Washer Pump Parts Q&A

Q: How to service and repair the windshield washer pump on 2008 Ford Expedition?
A: Service and repair of the windshield washer pump requires one to examine the product label information for warnings then obtain medical guidance regarding emergency care. The Material Safety Data Sheet (MSDS) should be consulted to prevent serious personal injury because improper instruction observance. Damage to the windshield washer pump seal must be avoided during servicing and operating the pump without reservoir fluid will cause premature pump failure. Starting with RH headlamp assembly removal users should Position the shield aside when needed to reach the washer pump. Disconnect all components which drive the windshield washer reservoir hoses and electrical connector from the windshield washer pump before finally removing the unit. The installation procedure of the new pump follows the steps of reversing the removal sequence.