How to remove and replace the rear bumper cover on 2008 Ford Explorer Sport Trac?

You must remove six screws which secure the rear bumper cover of Explorer, Mountaineer and Explorer Sport Trac before installation where you should tighten them to 6 Nm (53 lb-in) torque. Before proceeding with your work start by removing the six screws that hold the rear bumper cover splash shield where three screws exist on each side. The first step entails disconnecting the license plate electrical connector then avoid twisting the bumper cover to avoid any damage because proper removal occurs by directing the outer corners outward followed by pulling the cover towards the rear until it disconnects from retaining clips. Any essential components should be moved while following the reverse sequence of removal to install the parts.

OEM 2008 Ford Explorer Sport Trac Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Front Lower Part Number: 7L2Z-17D957-SA
$95.46 MSRP: $146.90
You Save: $51.44 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front Lower; Lower Cover
- Position: Front Lower
- Replaces: 7A2Z-17D957-SA
- Base No.: 17D957B
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-17D957-SA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-DPTM
$506.93 MSRP: $744.38
You Save: $237.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear Lower
- Base No.: 17K835
- Item Weight: 10.60 Pounds
- Item Dimensions: 77.4 x 23.5 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-17K835-DPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Front Part Number: 6L2Z-17D957-VAPTM
$360.70 MSRP: $529.67
You Save: $168.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 10.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-17D957-VAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 8A2Z-17K835-APTM
$256.93 MSRP: $377.28
You Save: $120.35 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A2Z-17K835-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Front Upper Part Number: 7L2Z-17D957-RBPTM
$150.96 MSRP: $219.73
You Save: $68.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front, Front Upper; Upper Cover
- Position: Front Upper
- Replaces: 6L2Z-17D957-RAPTM, 6L2Z-17D957-TAPTM
- Base No.: 17D957A
- Item Weight: 9.20 Pounds
- Item Dimensions: 81.1 x 28.1 x 24.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-17D957-RBPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-EA
$278.47 MSRP: $408.92
You Save: $130.45 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear Lower
- Base No.: 17K835
- Item Weight: 10.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-17K835-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Bumper Cover, Front Part Number: 8A2Z-17D957-APTM
$264.68 MSRP: $388.67
You Save: $123.99 (32%)
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Manufacturer Note: Paint to match
- Position: Front
- Base No.: 17D957
- Item Weight: 14.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A2Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Ford Explorer Sport Trac Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sport Trac Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sport Trac Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Sport Trac Bumper Parts Q&A

Q: How to remove and replace the rear bumper cover on 2008 Ford Explorer Sport Trac?
A: You must remove six screws which secure the rear bumper cover of Explorer, Mountaineer and Explorer Sport Trac before installation where you should tighten them to 6 Nm (53 lb-in) torque. Before proceeding with your work start by removing the six screws that hold the rear bumper cover splash shield where three screws exist on each side. The first step entails disconnecting the license plate electrical connector then avoid twisting the bumper cover to avoid any damage because proper removal occurs by directing the outer corners outward followed by pulling the cover towards the rear until it disconnects from retaining clips. Any essential components should be moved while following the reverse sequence of removal to install the parts.

Related 2008 Ford Explorer Sport Trac Parts

Alternate Year Models

2007 Ford Explorer Sport Trac Bumper 2009 Ford Explorer Sport Trac Bumper

OEM 2008 Ford Explorer Sport Trac Bumper

7 Bumpers found

2008 Ford Explorer Sport Trac Bumper Cover, Front Lower Part Number: 7L2Z-17D957-SA

2008 Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-DPTM

2008 Ford Explorer Sport Trac Bumper Cover, Front Part Number: 6L2Z-17D957-VAPTM

2008 Ford Explorer Sport Trac Bumper Cover, Rear Part Number: 8A2Z-17K835-APTM

2008 Ford Explorer Sport Trac Bumper Cover, Front Upper Part Number: 7L2Z-17D957-RBPTM

2008 Ford Explorer Sport Trac Bumper Cover, Rear Lower Part Number: 7A2Z-17K835-EA

2008 Ford Explorer Sport Trac Bumper Cover, Front Part Number: 8A2Z-17D957-APTM

2008 Ford Explorer Sport Trac Bumper

2008 Ford Explorer Sport Trac Bumper Parts Q&A

Related 2008 Ford Explorer Sport Trac Parts

Alternate Year Models