How to Service the Rear Drive Shaft on a Rear-Wheel Drive on 2008 Ford Explorer Sport Trac?

Prior to servicing the one-piece driveshaft in the rear of a rear-wheel drive vehicle drivers must secure the car in neutral gear and raise it onto a hoist. Bart the index marks located on extension housing and driveshaft before their disconnection and make positioning marks on the transmission output shaft to match the marks from the extension housing for balance purposes. Additionally, index-mark the driveshaft flange to the pinion flange. Replace the four pinion flange bolts with new ones before torquing them to 112 Nm (83 lb-ft). The proper tool should be selected to create gentle pressure in the specified area for dividing the driveshaft flange yoke from the pinion flange instead of direct hammering. A proper drive shaft flange fit with the pinion flange requires bolt tightening that must follow a star pattern. The threads of original bolts should be treated with Threadlock(R) and sealer when new replacements are not feasible. You should perform the opposite steps to reinstall the system.

OEM 2008 Ford Explorer Sport Trac Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Shafts found

View related parts
2008 Ford Explorer Sport Trac Drive Shaft Part Number: 7A2Z-4R602-N
$902.67 MSRP: $1047.69
You Save: $145.02 (14%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7A2Z-4R602-G, 7A2Z-4R602-D, 7A2Z-4R602-K
- Item Weight: 42.40 Pounds
- Item Dimensions: 9.7 x 76.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-4R602-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Drive Shaft, Front Part Number: 6L2Z-4A376-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft; Drive Shaft Assembly
- Position: Front
- Base No.: 4A376
- Item Weight: 13.70 Pounds
- Item Dimensions: 4.9 x 5.1 x 33.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-4A376-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Sport Trac Drive Shaft Part Number: 7A2Z-4R602-P
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7A2Z-4R602-L, 7A2Z-4R602-E
- Item Weight: 46.20 Pounds
- Item Dimensions: 9.6 x 75.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-4R602-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 6 Cyl 4.0 L GAS
View related parts
2008 Ford Explorer Sport Trac Drive Shaft Part Number: 7A2Z-4R602-Q
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7A2Z-4R602-F, 7A2Z-4R602-M
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7A2Z-4R602-Q
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford Explorer Sport Trac Submodels:
- Limited, XLT | 8 Cyl 4.6 L GAS

2008 Ford Explorer Sport Trac Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sport Trac Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sport Trac Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Sport Trac Drive Shaft Parts Q&A

Q: How to Service the Rear Drive Shaft on a Rear-Wheel Drive on 2008 Ford Explorer Sport Trac?
A: Prior to servicing the one-piece driveshaft in the rear of a rear-wheel drive vehicle drivers must secure the car in neutral gear and raise it onto a hoist. Bart the index marks located on extension housing and driveshaft before their disconnection and make positioning marks on the transmission output shaft to match the marks from the extension housing for balance purposes. Additionally, index-mark the driveshaft flange to the pinion flange. Replace the four pinion flange bolts with new ones before torquing them to 112 Nm (83 lb-ft). The proper tool should be selected to create gentle pressure in the specified area for dividing the driveshaft flange yoke from the pinion flange instead of direct hammering. A proper drive shaft flange fit with the pinion flange requires bolt tightening that must follow a star pattern. The threads of original bolts should be treated with Threadlock(R) and sealer when new replacements are not feasible. You should perform the opposite steps to reinstall the system.