How to Service the Rear One-Piece Drive Shaft on 2008 Ford F-150?

Begin servicing the one-piece driveshaft by putting the vehicle in NEUTRAL position on a hoist. A temporary marking system should be applied to maintain alignment between the driveshaft flange and the pinion flange as well as the driveshaft and extension housing during installation. Four new bolts should replace the four driveshaft flange bolts during installation while their torque should be set at 103 Nm (76 lb-ft). Take special care when working with the driveshaft flange because it tightly joins with the flange pilot while hammering should be avoided for both driveshaft components. A correct tool can be utilized in the specific area to disconnect the driveshaft flange from the flange pilot. Plugging the extension housing will prevent fluid from leaking after the driveshaft removal. The reinstallation process requires drivershaft flanges to seat properly on the pinion flange pilots before bolts receive even cross-pattern tightening to prevent any damage. The threads of unavailable new bolts should receive a threadlock and sealer application. Reinstallation requires repositioning the removed driveshaft components using the index marks designed during the removal process.

OEM 2008 Ford F-150 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Drive Shafts found

View related parts
2008 Ford F-150 Drive Shaft
Part Number: 5L3Z-4A376-A
$676.20 MSRP: $990.77
You Save: $314.57 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 2L1Z-4A376-AA
- Base No.: 4A376
- Item Weight: 21.00 Pounds
- Item Dimensions: 6.1 x 6.1 x 58.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4A376-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 7L3Z-4R602-K
$820.13 MSRP: $1121.54
You Save: $301.41 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4R602
- Item Weight: 52.20 Pounds
- Item Dimensions: 25.9 x 6.2 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-4R602-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- STX, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 8L3Z-4602-D
$731.25 MSRP: $1000.00
You Save: $268.75 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 5L3Z-4602-DB, 7L3Z-4602-D
- Base No.: 4602
- Item Weight: 48.30 Pounds
- Item Dimensions: 6.8 x 14.3 x 58.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-G
$997.88 MSRP: $1364.62
You Save: $366.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-UC, 5L3Z-4R602-U, 7L3Z-4R602-G
- Base No.: 4R602
- Item Weight: 51.80 Pounds
- Item Dimensions: 6.6 x 13.9 x 59.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 7L3Z-4602-J
$474.43 MSRP: $643.08
You Save: $168.65 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 5L3Z-4602-YA
- Base No.: 4602
- Item Weight: 36.10 Pounds
- Item Dimensions: 10.1 x 12.8 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-4602-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 8L3Z-4602-K
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 7L3Z-4602-K, 5L3Z-4602-XC
- Base No.: 4602
- Item Weight: 21.40 Pounds
- Item Dimensions: 9.8 x 13.3 x 54.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-F
$635.72 MSRP: $869.35
You Save: $233.63 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4R602-F
- Base No.: 4R602
- Item Weight: 50.00 Pounds
- Item Dimensions: 9.8 x 76.8 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 5L3Z-4602-KA
$347.31 MSRP: $470.77
You Save: $123.46 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Base No.: 4602
- Item Weight: 31.20 Pounds
- Item Dimensions: 6.2 x 6.4 x 55.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4602-KA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 5L3Z-4602-MA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 4L3Z-4602-MC
- Base No.: 4602
- Item Weight: 34.00 Pounds
- Item Dimensions: 6.3 x 6.3 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4602-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 5L3Z-4602-EA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 4L3Z-4602-EC
- Base No.: 4602
- Item Weight: 27.00 Pounds
- Item Dimensions: 8.7 x 13.2 x 56.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4602-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-D
$747.00 MSRP: $1021.54
You Save: $274.54 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-RC, 6L3Z-4R602-G, 7L3Z-4R602-D
- Base No.: 4R602
- Item Weight: 50.40 Pounds
- Item Dimensions: 26.2 x 6.2 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 8L3Z-4602-F
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Base No.: 4602
- Item Dimensions: 8.5 x 13.2 x 56.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 8L3Z-4602-G
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 7L3Z-4602-G
- Base No.: 4602
- Item Weight: 25.30 Pounds
- Item Dimensions: 8.9 x 13.3 x 57.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4R602-B
- Base No.: 4R602
- Item Weight: 51.10 Pounds
- Item Dimensions: 6.8 x 14.2 x 61.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-H
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-VC, 6L3Z-4R602-K, 7L3Z-4R602-H, 5L3Z-4R602-V, 5L3Z-4R602-VA
- Base No.: 4R602
- Item Weight: 59.10 Pounds
- Item Dimensions: 6.6 x 13.9 x 73.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4R602-E
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4R602-E
- Base No.: 4R602
- Item Weight: 52.40 Pounds
- Item Dimensions: 9.7 x 75.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- STX, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 8L3Z-4602-C
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 4L3Z-4602-CB, 7L3Z-4602-C, 5L3Z-4602-CB
- Base No.: 4602
- Item Weight: 29.70 Pounds
- Item Dimensions: 8.5 x 13.3 x 57.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft
Part Number: 8L3Z-4602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4602-A
- Base No.: 4602
- Item Dimensions: 10.1 x 12.9 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- Harley-Davidson Edition | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 5L3Z-4602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Base No.: 4602
- Item Dimensions: 9.7 x 12.8 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- STX, XL, XLT | 6 Cyl 4.2 L GAS
View related parts
2008 Ford F-150 Drive Shaft, Rear
Part Number: 5L3Z-4602-FA
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Base No.: 4602
- Item Dimensions: 8.8 x 13.3 x 57.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4602-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

2008 Ford F-150 Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-150 Drive Shaft Parts Questions & Experts Answers

Q: How to Service the Rear One-Piece Drive Shaft on 2008 Ford F-150?
A: Begin servicing the one-piece driveshaft by putting the vehicle in NEUTRAL position on a hoist. A temporary marking system should be applied to maintain alignment between the driveshaft flange and the pinion flange as well as the driveshaft and extension housing during installation. Four new bolts should replace the four driveshaft flange bolts during installation while their torque should be set at 103 Nm (76 lb-ft). Take special care when working with the driveshaft flange because it tightly joins with the flange pilot while hammering should be avoided for both driveshaft components. A correct tool can be utilized in the specific area to disconnect the driveshaft flange from the flange pilot. Plugging the extension housing will prevent fluid from leaking after the driveshaft removal. The reinstallation process requires drivershaft flanges to seat properly on the pinion flange pilots before bolts receive even cross-pattern tightening to prevent any damage. The threads of unavailable new bolts should receive a threadlock and sealer application. Reinstallation requires repositioning the removed driveshaft components using the index marks designed during the removal process.