FordParts
My Garage
My Account
Cart
OEM 2008 Ford F-250 Super Duty Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Battery Cables found
2008 Ford F-250 Super Duty Positive Cable, Driver Side Part Number: 7C3Z-14300-DA
$348.70 MSRP: $482.40You Save: $133.70 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable - Battery To Starter Motor; Battery Cable, Left; Battery Cables
- Position: Driver Side
- Base No.: 14300
- Item Weight: 4.70 Pounds
- Item Dimensions: 13.6 x 3.4 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14300-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-250 Super Duty Positive Cable, Passenger Side Part Number: 7C3Z-14300-CA
$183.96 MSRP: $305.45You Save: $121.49 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cable, Right; Battery Cables
- Position: Passenger Side
- Base No.: 14300
- Item Weight: 3.80 Pounds
- Item Dimensions: 17.9 x 17.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14300-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-250 Super Duty Positive Cable Part Number: 7C3Z-14300-AA
$635.23 MSRP: $1041.82You Save: $406.59 (40%)Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Base No.: 14300
- Item Weight: 3.90 Pounds
- Item Dimensions: 18.0 x 4.4 x 17.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cable Assembly; Battery Cable, Left; Battery Cables; Ground Strap
- Position: Driver Side
- Base No.: 14301
- Item Weight: 1.50 Pounds
- Item Dimensions: 9.2 x 3.0 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14301-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Cable Assembly; Battery Cable, Right; Battery Cables; Ground Strap
- Position: Passenger Side
- Base No.: 14301
- Item Weight: 2.90 Pounds
- Item Dimensions: 12.6 x 5.0 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14301-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-250 Super Duty Positive Cable Part Number: 7C3Z-14300-BA
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables
- Base No.: 14300
- Item Weight: 3.10 Pounds
- Item Dimensions: 11.6 x 4.4 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-14300-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford F-250 Super Duty Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford F-250 Super Duty Battery Cable Parts Q&A
- Q: How to service and repair the battery cables on 2008 Ford F-250 Super Duty?A: The first task before battery cable maintenance or repair requires disconnecting the battery. Tighten the negative battery cable to 30 Nm (22 lb-ft) after installing it correctly by removing and placing the battery ground cable terminal to the side. After removing the bolt position the battery ground cable terminal to the side before tightening it to 62 Nm (46 lb-ft) during the reinstall procedure. First set aside the RH splash shield to reach the battery ground cable bolt then unbolt and move the cable terminal to the frame before tightening it to 30 Nm (22 lb-ft) torques after reinstalling. When installing the auxiliary negative battery cable users must first move the LH splash shield for battey ground cable bolt removal followed by placing the auxiliary battery ground cable-to-frame terminal in position while torquing it to 40 Nm (30 lb-ft). Start by removing the starter solenoid terminal cover followed by removing its nut and placing the starter solenoid positive cable terminal to the side for reinstallation at 12 Nm (9 lb-ft). When reinstalling the starter solenoid wire terminal you should tighten it to 5 Nm (44 lb-in). Installation requires torquing the nut from the stud along with the positive battery cable bracket to a tightness of 25 Nm (18 lb-ft). The technician should remove the bolt and set aside the positive battery cable-to-frame bracket and should tighten it to 30 Nm (22 lb-ft) during reinstallation. Place the attaching cable terminal(s) to the sides before tightening them to 9 Nm (80 lb-in). Reinstallation requires this step. The disconnect the starter relay electrical connector from its position. Detach 5 pin-type retainers and the upper radiator air deflector before removing the nut and setting the power distribution box (PDB) cable terminal aside according to a torque setting of 9 Nm (80 lb-in). After detaching the cable connectors begin removing the positive battery cable. Installation requires reversing all steps of removal while maintaining a minimum 15 mm (0.59 in) distance between the positive battery cable and splash shield bolt. Additionally, bend the P-clip over the frame when needed to check clearance.