How to service and repair the front brake line flexible hose on 2008 Ford F-250 Super Duty?

The first step in repairing the front brake flexible hose is to use fresh brake fluid from a manufacturer-approved source while discarding previous fluid to keep out contaminants and damage. Products manufactured by Ford/Motorcraft under USA/Canadian authority require immediate emergency help which can be obtained by dialing 1-800-959-3673. Quick washing of paint and plastic areas with water becomes necessary to eliminate brake fluid residue. Begin brake caliper removal by getting rid of the two copper washers after brake caliper flow bolt extraction and then tighten the bolt to 48 Nm (35 lb-ft). The brake tube fitting must be separated from the brake flexible hose but the reinstallation torque should be set to 20 Nm (15 lb-ft). Replace the lower bracket bolt of the brake flexible hose and reinstall it with a torque of 15 Nm (11 lb-ft). Follow this by extracting the upper bracket bolt combined with the brake flexible hose before tightening them back at 30 Nm (22 lb-ft). After finishing the installation, reverse the brake caliper removal steps while bleeding the caliper.

OEM 2008 Ford F-250 Super Duty Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Lines found

View related parts
2008 Ford F-250 Super Duty Brake Hose, Passenger Side Part Number: 8C3Z-2267-A
$49.84 MSRP: $82.00
You Save: $32.16 (40%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly - Brake; Hydraulic Hose; Brake Line
- Position: Passenger Side
- Replaces: 5C3Z-2267-AD
- Base No.: 2267
- Item Weight: 4.10 Pounds
- Item Dimensions: 50.4 x 10.3 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2267-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose, Front Passenger Side Part Number: 8C3Z-2078-C
$31.52 MSRP: $42.89
You Save: $11.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; ABS Pressure Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 7C3Z-2078-CR
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.5 x 5.7 x 25.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2078-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Brake Hose, Driver Side Part Number: 5C3Z-2268-AC
Product Specifications
- Other Name: Tube Assembly - Brake; Hydraulic Hose; Brake Line
- Position: Driver Side
- Replaces: 5C3Z-2268-AB
- Base No.: 2268
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.7 x 3.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2268-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose, Front Part Number: 5C3Z-2282-AA
$49.05 MSRP: $76.55
You Save: $27.50 (36%)
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Base No.: 2282
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 6.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2282-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Brake Hose, Driver Side Part Number: 5C3Z-2268-EE
Product Specifications
- Other Name: Tube Assembly - Brake; Hydraulic Hose; Brake Line
- Position: Driver Side
- Replaces: 5C3Z-2268-ED
- Base No.: 2268
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.4 x 2.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2268-EE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose, Front Driver Side Part Number: 8C3Z-2078-CL
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; ABS Pressure Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Replaces: 7C3Z-2078-CL
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.6 x 5.6 x 26.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2078-CL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Brake Hose, Passenger Side Part Number: 8C3Z-2267-E
Product Specifications
- Other Name: Tube Assembly - Brake; Hydraulic Hose; Brake Line
- Position: Passenger Side
- Replaces: 5C3Z-2267-ED
- Base No.: 2267
- Item Weight: 0.80 Pounds
- Item Dimensions: 41.6 x 13.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2267-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Brake Hose, Driver Side Part Number: 7C3Z-2268-F
Product Specifications
- Other Name: Tube Assembly - Brake; Hydraulic Hose; Brake Line
- Position: Driver Side
- Base No.: 2268
- Item Weight: 0.70 Pounds
- Item Dimensions: 26.0 x 8.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-2268-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose, Passenger Side Part Number: 8C3Z-2078-R
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Base No.: 2078
- Item Weight: 1.40 Pounds
- Item Dimensions: 12.6 x 3.0 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2078-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose Part Number: 5C3Z-2282-BA
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Base No.: 2282
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 5.9 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-2282-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Flex Hose, Driver Side Part Number: 8C3Z-2078-L
Product Specifications
- Other Name: Hose Assembly - Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Base No.: 2078
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.7 x 2.7 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-2078-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

2008 Ford F-250 Super Duty Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Brake Line Parts Q&A

Q: How to service and repair the front brake line flexible hose on 2008 Ford F-250 Super Duty?
A: The first step in repairing the front brake flexible hose is to use fresh brake fluid from a manufacturer-approved source while discarding previous fluid to keep out contaminants and damage. Products manufactured by Ford/Motorcraft under USA/Canadian authority require immediate emergency help which can be obtained by dialing 1-800-959-3673. Quick washing of paint and plastic areas with water becomes necessary to eliminate brake fluid residue. Begin brake caliper removal by getting rid of the two copper washers after brake caliper flow bolt extraction and then tighten the bolt to 48 Nm (35 lb-ft). The brake tube fitting must be separated from the brake flexible hose but the reinstallation torque should be set to 20 Nm (15 lb-ft). Replace the lower bracket bolt of the brake flexible hose and reinstall it with a torque of 15 Nm (11 lb-ft). Follow this by extracting the upper bracket bolt combined with the brake flexible hose before tightening them back at 30 Nm (22 lb-ft). After finishing the installation, reverse the brake caliper removal steps while bleeding the caliper.