How to Service the A/C Expansion Valve on 2008 Ford Focus?

The thermostatic expansion valve (TXV) service process begins by removing its fitting nut followed by disconnecting the fitting and deleting the gasket seals. Then disconnect the two TXV bolts by tightening them to 8 Nm (71 lb-in) when installing. The service procedure includes TXV removal and O-ring seal discarding after disconnecting the TXV fitting. Thermostatic expansion valve service requires installing new O-ring seals and gasket seals using the correct amount of clean PAG oil during the reverse installation procedure. A proper final torque on the fitting should be set at 15 Nm (133 lb-in).

OEM 2008 Ford Focus A/C Expansion Valve

Air Conditioning Expansion Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Expansion Valve found

View related parts
2008 Ford Focus Expansion Valve Part Number: 8S4Z-19849-A
Product Specifications
- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Base No.: 19849
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2008 Ford Focus A/C Expansion Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus A/C Expansion Valve Parts Q&A

Q: How to Service the A/C Expansion Valve on 2008 Ford Focus?
A: The thermostatic expansion valve (TXV) service process begins by removing its fitting nut followed by disconnecting the fitting and deleting the gasket seals. Then disconnect the two TXV bolts by tightening them to 8 Nm (71 lb-in) when installing. The service procedure includes TXV removal and O-ring seal discarding after disconnecting the TXV fitting. Thermostatic expansion valve service requires installing new O-ring seals and gasket seals using the correct amount of clean PAG oil during the reverse installation procedure. A proper final torque on the fitting should be set at 15 Nm (133 lb-in).