How to service the blower motor resistor on 2008 Ford Focus?

The service process for the blower motor resistor begins with putting down the glove compartment then removing the electrical connector. The detachment of the blower motor resistor from its housing requires first sliding it to the right while lifting it upward until removal. The blower motor resistor arrives without an included mounting screw and the package includes a back up screw boss for installation when the resistor fails to clip properly on the housing between heater core and evaporator core. The installer should perform the installation by reversing the removal method.

OEM 2008 Ford Focus Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2008 Ford Focus Resistor Part Number: 8S4Z-18591-A
Product Specifications
- Other Name: Resistor Assembly; HVAC Blower Motor Resistor; Blower Motor Resistor
- Base No.: 19A706
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.8 x 4.0 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-18591-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2008 Ford Focus Blower Motor Resistor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Blower Motor Resistor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Blower Motor Resistor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus Blower Motor Resistor Parts Q&A

Q: How to service the blower motor resistor on 2008 Ford Focus?
A: The service process for the blower motor resistor begins with putting down the glove compartment then removing the electrical connector. The detachment of the blower motor resistor from its housing requires first sliding it to the right while lifting it upward until removal. The blower motor resistor arrives without an included mounting screw and the package includes a back up screw boss for installation when the resistor fails to clip properly on the housing between heater core and evaporator core. The installer should perform the installation by reversing the removal method.