OEM 2008 Ford Fusion Air Bag Sensor

2008 Ford Fusion Air Bag Sensor Parts Questions & Experts Answers

• Q: What are the crucial steps to take when servicing the front Air Bag Sensor involved in a crash on 2008 Ford Fusion?

  A: Before servicing the front impact severity sensor one should check the restraints control module (RCM) as well as the impact sensor attachment points for deformities if the vehicle suffered crash damage. All production specifications for damaged areas should be restored to their original state before installing new RCM components and sensors without exception because inadequate installation could result in fatalities or severe injuries in a car accident. The restraints control module indicator should light up when the RCM fuse is removed while the ignition switch is ON because this represents correct behavior with no issues in the supplemental restraint system (SRS). A vehicle cannot be released for market unless the supplemental restraint system completes all operational checks with no detected faults. The diagnostic process requires part replacement as a first step towards repair; reinstalling the original part should follow and the diagnostic procedure must be executed again. Your first step should be to disable the SRS system before removing the 2 bolts along with 2 pin-type retainers from the upper grille. Operation of the restraint systems depend on tight fastener torque to correct specifications. Both components need thorough cleaning with no residue allowed prior to installing the front impact severity sensor and bracket assembly. Make note of the locator tab position for its later reinstallation. To proceed with this operation gently move the upper grille forward before removing the bolt securing the front impact severity sensor assembly while disconnecting its electrical connector for final removal of the assembly. First secure the bolt to 12 Nm (9 lb-ft) torque specification then enable SRS functions as the last step for installation.