FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2009 Ford Fusion Reservoir Part Number: 6E5Z-8A080-AA
$22.48 MSRP: $33.45You Save: $10.97 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Base No.: 8A080
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.6 x 9.4 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir, specifically the degas bottle for 2.3L, 3.0L, and 3.5L engines on 2009 Ford Fusion?A: Service and repair of the coolant reservoir degas bottle for 2.3L, 3.0L and 3.5L engines requires an engine cooldown before opening the cooling system due to avoided risks of severe personal injury from pressurized steam and hot liquid. The cooling system pressure will dissipate by turning the pressure relief cap counterclockwise one half rotation before you remove it. You should use hose clamp pliers to secure the lower degas bottle hose before using a suitable suction device to siphon coolant from the degas bottle. Disconnect the wiring retainer from the degas bottle before disconnecting the degas bottle-to-radiator hose which should be placed aside. The degas bottle-to-thermostat housing hose can be removed from 3.5L engines before placing it to the side. Disconnect the lower degas bottle hose and remove its nut, bolt and degas bottle sequence. The fasteners for installing the degas bottle should be tightened up to 9 Nm (80 lb-in) before carrying out the removal steps in reverse order. Complete the degas bottle filling process by adding the essential coolant mixture according to the specified level.