FordParts
My Garage
My Account
Cart
OEM 2008 Ford Fusion Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Injectors found
2008 Ford Fusion Injector Part Number: 7L5Z-9F593-AA
$39.67 MSRP: $63.00You Save: $23.33 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Base No.: 9F593
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 7L5Z-9F593-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Injector Part Number: 6E5Z-9F593-AA
$54.54 MSRP: $86.60You Save: $32.06 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Base No.: 9F593
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 1.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 6E5Z-9F593-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Injector Part Number: 3S4Z-9F593-AA
Product Specifications- Other Name: Injector Assembly; Fuel Injector
- Manufacturer Note: PZEV
- Base No.: 9F593
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 3S4Z-9F593-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Fuel Injector
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Fuel Injector available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Fuel Injector as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Fusion Fuel Injector Parts Q&A
- Q: How to service the fuel injector and fuel rail safely and effectively on 2008 Ford Fusion?A: Safety measures should be a priority during fuel injector and fuel rail service since fuel components contain flammable mixtures therefore avoid open flames and smoking anywhere near these components. The first step includes decompressing fuel system pressure to stop unintended fuel spilling before disconnecting the battery ground cable. Detach the two nuts and bolt and remove the generator air inlet duct before disconnecting the fuel tube quick connect coupling from the fuel rail. Lift off the two wiring retainers from the fuel rail before removing the fuel rail insulator. The process requires separation of the two swirl control valve electrical connectors along with the four fuel injector electrical connectors. The assembly consists of removing the fuel rail together with fuel injectors after removing both fuel rail bolts. Eliminate and dispose of the eight seals used for the injector O-rings. The installation requires new special fuel-resistant O-ring seals which need lubrication with clean engine oil before installation. Always discard used seals. There are two procedures during installation: (1) Place fuel injectors along with retainer clips inside the fuel rail before (2) Reinstalling the fuel rail combined with fuel injectors using two fuel rail bolts which must be tightened to 23 Nm (17 lb-ft). Reconnect both of the swirl control valve electrical connectors and four fuel injector electrical connectors. Fit the fuel rail insulator before fastening both wiring harness retainers. Join the fuel tube quick connect coupling to the fuel rail. The generator air inlet duct should be reinstalled with two nuts and bolt and then tightened to 6 Nm (53 lb-in) before reconnecting the battery ground cable.