How to service the fuel injector and fuel rail safely and effectively on Ford Fusion?

Safety measures should be a priority during fuel injector and fuel rail service since fuel components contain flammable mixtures therefore avoid open flames and smoking anywhere near these components. The first step includes decompressing fuel system pressure to stop unintended fuel spilling before disconnecting the battery ground cable. Detach the two nuts and bolt and remove the generator air inlet duct before disconnecting the fuel tube quick connect coupling from the fuel rail. Lift off the two wiring retainers from the fuel rail before removing the fuel rail insulator. The process requires separation of the two swirl control valve electrical connectors along with the four fuel injector electrical connectors. The assembly consists of removing the fuel rail together with fuel injectors after removing both fuel rail bolts. Eliminate and dispose of the eight seals used for the injector O-rings. The installation requires new special fuel-resistant O-ring seals which need lubrication with clean engine oil before installation. Always discard used seals. There are two procedures during installation: (1) Place fuel injectors along with retainer clips inside the fuel rail before (2) Reinstalling the fuel rail combined with fuel injectors using two fuel rail bolts which must be tightened to 23 Nm (17 lb-ft). Reconnect both of the swirl control valve electrical connectors and four fuel injector electrical connectors. Fit the fuel rail insulator before fastening both wiring harness retainers. Join the fuel tube quick connect coupling to the fuel rail. The generator air inlet duct should be reinstalled with two nuts and bolt and then tightened to 6 Nm (53 lb-in) before reconnecting the battery ground cable.

OEM Ford Fusion Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Fuel Injectors found

View related parts
Ford Fusion Injector
Part Number: BR3Z-9F593-B
$45.46 MSRP: $72.18
You Save: $26.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Injector
Part Number: CJ5Z-9F593-B
$130.39 MSRP: $214.55
You Save: $84.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: CM-5220, CJ5Z-9F593-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Injector
Part Number: BB3Z-9F593-A
$48.49 MSRP: $77.00
You Save: $28.51 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Injector
Part Number: 9E5Z-9F593-A
$47.17 MSRP: $74.91
You Save: $27.74 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020, 2010-2012 Ford Fusion | Hybrid, Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Injector
Part Number: 7L5Z-9F593-AA
$39.67 MSRP: $63.00
You Save: $23.33 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS
View related parts
Ford Fusion Injector
Part Number: FT4Z-9F593-A
$113.82 MSRP: $187.27
You Save: $73.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Injector
Part Number: BB5Z-9F593-B
$113.72 MSRP: $190.91
You Save: $77.19 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; GDI Fuel Injector; Fuel Injector
- Replaces: BB5Z-9F593-A, CM-5198
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Injector
Part Number: 9L8Z-9F593-A
$51.96 MSRP: $85.49
You Save: $33.53 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | SE, SEL | 6 Cyl 3.0 L FLEX
View related parts
Ford Fusion Injector
Part Number: 8S4Z-9F593-A
$55.80 MSRP: $91.82
You Save: $36.02 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Injector
Part Number: 7T4Z-9F593-B
$56.47 MSRP: $92.91
You Save: $36.44 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Replaces: 7T4Z-9F593-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Sport | 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Injector
Part Number: 6E5Z-9F593-AA
$54.54 MSRP: $86.60
You Save: $32.06 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Injector
Part Number: FB5Z-9F593-C
$74.26 MSRP: $122.18
You Save: $47.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5252, FB5Z-9F593-A, FB5Z-9F593-B, CM-5241
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Injector
Part Number: DS7Z-9F593-DA
$66.96 MSRP: $110.18
You Save: $43.22 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Replaces: CM-5240, DS7Z-9F593-D, CM-5261, CM-5221, DS7Z-9F593-A, DS7Z-9F593-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Injector
Part Number: 3S4Z-9F593-AA
Product Specifications
- Other Name: Injector Assembly; Fuel Injector
- Manufacturer Note: PZEV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS

Ford Fusion Fuel Injector

Welcome to our website where you can discover high-quality, genuine Ford Fusion Fuel Injector. We offer an extensive inventory of OEM Ford Fusion Fuel Injector at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Fusion Fuel Injector Parts Questions & Experts Answers

Injector
7L5Z-9F593-AA
Q: How to service the fuel injector and fuel rail safely and effectively on Ford Fusion?
A: Safety measures should be a priority during fuel injector and Fuel Rail service since fuel components contain flammable mixtures therefore avoid open flames and smoking anywhere near these components. The first step includes decompressing fuel system pressure to stop unintended fuel spilling before disconnecting the battery ground cable. Detach the two nuts and bolt and remove the generator air inlet duct before disconnecting the fuel tube quick connect coupling from the fuel rail. Lift off the two wiring retainers from the fuel rail before removing the fuel rail insulator. The process requires separation of the two swirl control valve electrical connectors along with the four fuel injector electrical connectors. The assembly consists of removing the fuel rail together with fuel injectors after removing both fuel rail bolts. Eliminate and dispose of the eight seals used for the injector O-rings. The installation requires new special fuel-resistant O-ring seals which need lubrication with clean engine oil before installation. Always discard used seals. There are two procedures during installation: (1) Place fuel injectors along with retainer clips inside the fuel rail before (2) Reinstalling the fuel rail combined with fuel injectors using two fuel rail bolts which must be tightened to 23 Nm (17 lb-ft). Reconnect both of the swirl control valve electrical connectors and four fuel injector electrical connectors. Fit the fuel rail insulator before fastening both wiring harness retainers. Join the fuel tube quick connect coupling to the fuel rail. The generator air inlet duct should be reinstalled with two nuts and bolt and then tightened to 6 Nm (53 lb-in) before reconnecting the battery ground cable.