FordParts
My Garage
My Account
Cart
OEM 2008 Ford Fusion Oil Filter
Engine Oil filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oil Filters found
2008 Ford Fusion Oil Filter Part Number: F1AZ-6731-BD
$7.88 MSRP: $12.71You Save: $4.83 (38%)Product Specifications- Other Name: Filter Assembly - Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter
- Replaces: F1AZ-6731-A
- Base No.: 6731
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.6 x 4.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F1AZ-6731-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Oil Filter Part Number: 3S7Z-6731-A
$10.59 MSRP: $16.82You Save: $6.23 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Filter Assembly - Engine Oil; Maintenance Kit; Spin-On Oil Filter; Coolant Filter; Filter Element
- Replaces: 3M4Z-6744-AC
- Base No.: 6731
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S7Z-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Oil Filter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Oil Filter available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Oil Filter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Fusion Oil Filter Parts Q&A
- Q: How to service and repair the oil filter on 2008 Ford Fusion?A: The service and repair procedure for the oil filter starts by positioning the vehicle into neutral position on a hoist. Two screws must be removed if the oil filter access cover exists. First use a cup-style oil filter wrench to turn the oil filter cover one full turn counterclockwise for loose attachment then remove the oil filter drain plug and drain oil from the adapter. Begin the service by removing the drain plug from the oil filter adapter while collecting engine oil through the adapter and the drain plug O-ring seal needs disposal. The service technician should remove the oil filter cover followed by the oil filter element while discarding both objects and the oil filter cover O-ring seal. Clean the oil filter cover as well as the mounting surface of the oil filter adapter and lubricate a new oil filter cover O-ring seal with oil from the engine before installation. The oil filter cover requires precise tightening to 33 Nm (24 lb-ft) with the cup-shaped wrench since overtightening has the risk of damaging the cover alongside the O-ring seal and creating an oil leak. Install a new oil filter drain plug O-ring seal by coating it with clean engine oil and position it correctly before securely tightening to 10 Nm (89 lb-inch). Avoid overtorque to prevent any damage. Set the two screws to complete the reinstallation process when using the oil filter access cover.