How to Service the Engine Oil Pressure Switch on 2008 Ford Fusion?

Professional servicing of the Engine Oil Pressure (EOP) Switch begins when the vehicle gets placed on a hoist in neutral transmission gear. The installation of the underbody cover demands removing seven screws that secure it. The procedure for correct clutch slave cylinder installation after moving it aside requires a torque of 22 Nm (16 lb-ft) on the two bolts that secure the device. After disconnecting the electrical connector from the Engine Oil Pressure switch, you can remove that switch for future installation at 15 Nm (11 lb-ft). The installation of the new EOP switch requires Teflon-treated pipe sealant on its threads, followed by performing steps in reverse order to finalize the procedure.

OEM 2008 Ford Fusion Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2008 Ford Fusion Pressure Switch Part Number: G1CZ-9278-B
$24.30 MSRP: $38.58
You Save: $14.28 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Oil Pressure Switch
- Replaces: 1U5Z-9278-GA, SW-6376, 6U5Z-9278-G, G1CZ-9278-A
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G1CZ-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- Energi SE, Energi Titanium, Hybrid, Platinum, S, S Hybrid, SE, SE Hybrid, SEL, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
2008 Ford Fusion Pressure Switch Part Number: 6U5Z-9278-N
$127.08 MSRP: $209.09
You Save: $82.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Oil Pressure Switch
- Replaces: SW-6356, 6U5Z-9278-J
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U5Z-9278-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Fusion Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion Oil Pressure Switch Parts Q&A

Q: How to Service the Engine Oil Pressure Switch on 2008 Ford Fusion?
A: Professional servicing of the Engine Oil Pressure (EOP) Switch begins when the vehicle gets placed on a hoist in neutral transmission gear. The installation of the underbody cover demands removing seven screws that secure it. The procedure for correct clutch slave cylinder installation after moving it aside requires a torque of 22 Nm (16 lb-ft) on the two bolts that secure the device. After disconnecting the electrical connector from the Engine Oil Pressure switch, you can remove that switch for future installation at 15 Nm (11 lb-ft). The installation of the new EOP switch requires Teflon-treated pipe sealant on its threads, followed by performing steps in reverse order to finalize the procedure.