How to service the MAP Sensor on 2008 Ford Fusion?

Long-term servicing of the manifold absolute pressure sensor requires disconnecting its electrical connector first. The user needs to remove first the screw that holds the MAP sensor in place and after that to extract the sensor. During new sensor installation the fastener should get tightened to 3 Nm torque. Engine oil that is clean should be used to lubricate MAP sensor O-ring seals before conducting installation. Compete the installation by performing the reverse order of removal steps.

OEM 2008 Ford Fusion MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2008 Ford Fusion M.A.P. Sensor Part Number: 1S7Z-9F479-AD
$73.26 MSRP: $120.55
You Save: $47.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Manifold Absolute Pressure Sensor; Manifold Sensor; Map Sensor; Sensor; Pressure Sensor
- Replaces: 1S7Z-9F479-AA, 4S4Z-9F479-AA, CX-1976, 1S7Z-9F479-AC, CX-2559
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-9F479-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- Energi Platinum, Energi SE, Energi Titanium, Hybrid, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
2008 Ford Fusion M.A.P. Sensor Part Number: 6E5Z-9F479-BA
Product Specifications
- Other Name: Sensor Assembly; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor
- Replaces: 6E5Z-9F942-BA
- Base No.: 9F479
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9F479-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Fusion Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Fusion MAP Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion MAP Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion MAP Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Fusion MAP Sensor Parts Q&A

Q: How to service the MAP Sensor on 2008 Ford Fusion?
A: Long-term servicing of the manifold absolute pressure sensor requires disconnecting its electrical connector first. The user needs to remove first the screw that holds the MAP sensor in place and after that to extract the sensor. During new sensor installation the fastener should get tightened to 3 Nm torque. Engine oil that is clean should be used to lubricate MAP sensor O-ring seals before conducting installation. Compete the installation by performing the reverse order of removal steps.

Alternate Year Models

2007 Ford Fusion MAP Sensor 2009 Ford Fusion MAP Sensor

OEM 2008 Ford Fusion MAP Sensor

2 MAP Sensors found

2008 Ford Fusion M.A.P. Sensor Part Number: 1S7Z-9F479-AD

2008 Ford Fusion M.A.P. Sensor Part Number: 6E5Z-9F479-BA

2008 Ford Fusion MAP Sensor

2008 Ford Fusion MAP Sensor Parts Q&A

Alternate Year Models