How to Service and Repair the Oil Pressure Switch on 2007 Ford Fusion?

A proper service or repair of the Engine Oil Pressure (EOP) Switch requires that you position the vehicle on a hoist by keeping the transmission in neutral mode. The installation process requires clean engine oil for lubricating the engine oil filter gasket while you remove the filter, which must be tightened to 5 Nm (44 inch lbs.) before rotating it by 180 degrees. The EOP switch servicing process begins when engineers disconnect its electrical connector and then remove the switch. To install the new EOP switch, users must first apply PTFE thread sealant on the oil pressure switch threads, then tighten it to 14 Nm (10 ft. lbs.). Perform the reverse steps to finish the installation process.

OEM 2007 Ford Fusion Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2007 Ford Fusion Pressure Switch Part Number: G1CZ-9278-B
$24.30 MSRP: $38.58
You Save: $14.28 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Oil Pressure Switch
- Replaces: 1U5Z-9278-GA, SW-6376, 6U5Z-9278-G, G1CZ-9278-A
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G1CZ-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- Energi SE, Energi Titanium, Hybrid, Platinum, S, S Hybrid, SE, SE Hybrid, SEL, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
2007 Ford Fusion Pressure Switch Part Number: 6U5Z-9278-N
$127.08 MSRP: $209.09
You Save: $82.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Oil Pressure Switch
- Replaces: SW-6356, 6U5Z-9278-J
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U5Z-9278-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Ford Fusion Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Fusion Oil Pressure Switch Parts Q&A

Q: How to Service and Repair the Oil Pressure Switch on 2007 Ford Fusion?
A: A proper service or repair of the Engine Oil Pressure (EOP) Switch requires that you position the vehicle on a hoist by keeping the transmission in neutral mode. The installation process requires clean engine oil for lubricating the engine oil filter gasket while you remove the filter, which must be tightened to 5 Nm (44 inch lbs.) before rotating it by 180 degrees. The EOP switch servicing process begins when engineers disconnect its electrical connector and then remove the switch. To install the new EOP switch, users must first apply PTFE thread sealant on the oil pressure switch threads, then tighten it to 14 Nm (10 ft. lbs.). Perform the reverse steps to finish the installation process.