FordParts
My Garage
My Account
Cart
OEM 2008 Ford Mustang Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Injectors found
2008 Ford Mustang Injector Part Number: 5L2Z-9F593-CB
$58.01 MSRP: $95.45You Save: $37.44 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Manufacturer Note: Injector O-Rings Are Not Serviced Separately. Available Only With Injector Asy.
- Replaces: 5L2Z-9F593-CA
- Base No.: 9F593
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 5L2Z-9F593-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Injector Part Number: 4L8Z-9F593-B
$63.25 MSRP: $106.18You Save: $42.93 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Fuel Injection; Fuel Injector
- Replaces: 2C5Z-9F593-AA, 4L8Z-9F593-AA
- Base No.: 9F593
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L8Z-9F593-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Injector Part Number: 7R3Z-9F593-AA
$77.31 MSRP: $127.20You Save: $49.89 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Base No.: 9F593
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 7R3Z-9F593-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Fuel Injector
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Fuel Injector available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Fuel Injector as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Mustang Fuel Injector Parts Q&A
- Q: How to service the fuel injectors on 2008 Ford Mustang?A: A proper servicing of fuel injectors requires starting with fuel system pressure relief while disconnecting the battery ground cable. The first step on the right-hand side requires unfastening the valve cover stud mounting clamp and setting it aside and disconnecting all three fuel injector electrical connections. Move the two bolted fuel rail supply tube components from the right side fuel rail while ensuring these bolts reach 6 Nm (53 lb-in) torque when tightened for reinstallation. Replacement O-ring seals made specifically for fuel-resistant material are essential because standard O-ring seals can cause fuel system leaks therefore disposing of the old fuel rail supply tube O-ring seal. Secure the right side fuel rail with two bolts at 23 Nm (17 lb-ft) while following installation. After tightening the bolts, remove and discard three fuel injectors with their O-ring seals. The installation process begins by disconnecting the left-hand vacuum hose and electrical connector of the fuel rail pressure and temperature sensor before taking off the wiring harness retainer from the valve cover stud bolt and disconnecting all three fuel injector electrical connectors. The two left-side fuel rail supply tube bolts need removal while the reinstallation requires another 6Nm (53 lb-in) torque setting before discarding the O-ring seal for the fuel rail supply tube. Unbolt the two holder points securing the left side fuel rail yet tighten them to 23 Nm (17 lb-ft) during installation before extracting the three fuel injectors which need their O-ring seals disposed. The installation process should be completed by following reverse order steps while applying clean engine oil to new O-ring seals before their placement.