OEM 2008 Ford Mustang Power Window Motor

2008 Ford Mustang Power Window Motor Parts Questions & Experts Answers

• Q: How to service the front Power Window Motor on 2008 Ford Mustang?

  A: Service of the front door window motor begins with de-initializing the LH or RH front window motor except for cases where the motor was taken off the window regulator or new components such as regulator, motor, or glass are added or lubrication is applied to the regulator or glass run. Begin service by taking away the door window glass followed by disconnecting the door window motor electrical connector. Install the three door window motor nuts at 10 Nm (89 lb-in) after installation. The removal of the lower right window regulator nut requires caution because touching the jack screw might result in window adjustment malfunctions. After removing the door window regulator nuts you must tighten them to 10 Nm (89 lb-in) when installing them. No need to unmount the regulator and motor assembly from the door since positioning it as required will enable access to door window motor screws. Disconnect the three screws which secure the door window motor and remove the motor from the vehicle. Follow the installation steps by undoing removal steps followed by necessary glass adjustments for the door window. Finally, initialize the window motor.