How to service the blower motor on 2008 Ford Ranger?

The service process starts with disconnecting the electrical connector of the speed control actuator followed by removing the speed control actuator bolt while setting the actuator aside. The bolt installation should be tightened to 11 Nm (8 lb-ft). Begin by detaching the blower motor electrical connector before removing the blower motor vent tube. The blower motor needs its four screws removed to separate from the system and extract it from the unit. Follow the blower motor wheel clip removal by taking out the blower motor wheel itself. The reverse steps from removal will finish the installation process.

OEM 2008 Ford Ranger Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motors found

View related parts
2008 Ford Ranger Blower Motor, Front
Part Number: XL2Z-19805-EA
$55.91 MSRP: $92.00
You Save: $36.09 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front
- Position: Front
- Replaces: F87Z-19805-BA
- Base No.: 19805
- Item Weight: 4.30 Pounds
- Item Dimensions: 5.9 x 7.3 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-19805-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Housing Assembly
Part Number: 1L5Z-18456-CA
Product Specifications
- Other Name: Blower Assembly; HVAC Blower Motor Housing; Case Assembly; Housing; HVAC Blower Motor
- Manufacturer Note: less a/c
- Replaces: F67Z-18568-BA
- Base No.: 18568
- Item Weight: 8.90 Pounds
- Item Dimensions: 17.1 x 15.2 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-18456-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Blower Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Blower Motor Parts Questions & Experts Answers

Q: How to service the blower motor on 2008 Ford Ranger?
A: The service process starts with disconnecting the electrical connector of the speed control actuator followed by removing the speed control actuator bolt while setting the actuator aside. The bolt installation should be tightened to 11 Nm (8 lb-ft). Begin by detaching the blower motor electrical connector before removing the blower motor vent tube. The blower motor needs its four screws removed to separate from the system and extract it from the unit. Follow the blower motor wheel clip removal by taking out the blower motor wheel itself. The reverse steps from removal will finish the installation process.