How to Service and Repair the Tailgate Handle on 2008 Ford Ranger?

The first step for tailgate handle servicing starts with unfastening the 8 screws that keep the tailgate access cover in place before tightening the screws to 5 Nm (44 lb-in) after reinstalling. The first step requires opening the clips until you can disconnect the tailgate latch actuating rods from the remote control. The nuts on the tailgate latch remote control need removal before you install them by tightening them to 12 Nm (9 lb-ft). Ending the procedure requires removal of the tailgate handle. The process ends by performing the reverse sequence of the removal steps.

OEM 2008 Ford Ranger Tailgate Handle

Back Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tailgate Handle found

View related parts
2008 Ford Ranger Handle, Black, Rear
Part Number: 1L5Z-9943400-AAA
$26.26 MSRP: $39.08
You Save: $12.82 (33%)
ADD TO CART
Product Specifications
- Other Name: Tailgate Handle, Rear; Exterior Door Handle; Outside Door Handle; Tailgate Handle
- Position: Rear
- Replaces: XL5Z-9943400-AAE
- Base No.: 43400
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.1 x 8.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9943400-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Tailgate Handle

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Tailgate Handle available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Tailgate Handle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Tailgate Handle Parts Questions & Experts Answers

Q: How to Service and Repair the Tailgate Handle on 2008 Ford Ranger?
A: The first step for tailgate handle servicing starts with unfastening the 8 screws that keep the tailgate access cover in place before tightening the screws to 5 Nm (44 lb-in) after reinstalling. The first step requires opening the clips until you can disconnect the tailgate latch actuating rods from the remote control. The nuts on the tailgate latch remote control need removal before you install them by tightening them to 12 Nm (9 lb-ft). Ending the procedure requires removal of the tailgate handle. The process ends by performing the reverse sequence of the removal steps.