How to Service and Repair the Tailgate Handle on 2009 Ford Ranger?

Start repair and servicing of the tailgate handle by unscrewing the 8 cover access screws then tighten them to 5 Nm when reinstalling. Then proceed by opening the clips while disconnecting the tailgate latch actuating rods from the remote control system. First untighten the nuts securing the tailgate latch remote control and tighten them to 12 Nm (106 lb-in) for installation. For reinstallation replace the tailgate handle through the reversal of the extraction sequence.

OEM 2009 Ford Ranger Tailgate Handle

Back Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tailgate Handle found

View related parts
2009 Ford Ranger Handle, Black, Rear
Part Number: 1L5Z-9943400-AAA
$26.26 MSRP: $39.08
You Save: $12.82 (33%)
ADD TO CART
Product Specifications
- Other Name: Tailgate Handle, Rear; Exterior Door Handle; Outside Door Handle; Tailgate Handle
- Position: Rear
- Replaces: XL5Z-9943400-AAE
- Base No.: 43400
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.1 x 8.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9943400-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Tailgate Handle

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Tailgate Handle available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Tailgate Handle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Tailgate Handle Parts Questions & Experts Answers

Q: How to Service and Repair the Tailgate Handle on 2009 Ford Ranger?
A: Start repair and servicing of the tailgate handle by unscrewing the 8 cover access screws then tighten them to 5 Nm when reinstalling. Then proceed by opening the clips while disconnecting the tailgate latch actuating rods from the remote control system. First untighten the nuts securing the tailgate latch remote control and tighten them to 12 Nm (106 lb-in) for installation. For reinstallation replace the tailgate handle through the reversal of the extraction sequence.