How to service and repair the throttle body on 2008 Ford Ranger?

A correct throttle body service requires starting with air cleaner outlet pipe removal followed by bolt removal and throttle body cover unfastening. The service begins with disconnecting the throttle position sensor electrical connector alongside the accelerator cable and speed control cable and throttle body return spring. The service requires the removal of three bolts and the throttle body itself together with its stud bolt along with the bolts' discard of its gasket. Before installing the throttle body always tighten its bolts to 10 Nm (89 lb-in) torque specification. The throttle position sensor needs to get removed when servicing the throttle body. Before reinstalling the throttle body, all sealing surfaces require cleaning while new gaskets must be installed before following the removal procedure in reverse order.

OEM 2008 Ford Ranger Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Bodies found

View related parts
2008 Ford Ranger Throttle Body Part Number: 4L5Z-9E926-AA
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.1 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-9E926-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Throttle Body Part Number: 6L5Z-9E926-A
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Fuel Inject Electronic Throttle Assembly; Body Assembly - Carburettor Throttle
- Base No.: 9E926
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.1 x 6.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Throttle Body Part Number: 7L5Z-9E926-A
Product Specifications
- Other Name: Body Assembly - Carburetor Throttle; Body Assembly - Carburettor Throttle
- Replaces: 3L5Z-9E926-BA, 2L5Z-9E926-BA
- Base No.: 9E926
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.0 x 4.6 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-9E926-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Ranger Throttle Body

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Throttle Body available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Throttle Body as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Throttle Body Parts Q&A

Q: How to service and repair the throttle body on 2008 Ford Ranger?
A: A correct throttle body service requires starting with air cleaner outlet pipe removal followed by bolt removal and throttle body cover unfastening. The service begins with disconnecting the throttle position sensor electrical connector alongside the accelerator cable and speed control cable and throttle body return spring. The service requires the removal of three bolts and the throttle body itself together with its stud bolt along with the bolts' discard of its gasket. Before installing the throttle body always tighten its bolts to 10 Nm (89 lb-in) torque specification. The throttle position sensor needs to get removed when servicing the throttle body. Before reinstalling the throttle body, all sealing surfaces require cleaning while new gaskets must be installed before following the removal procedure in reverse order.