FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln Mark LT Cooling Hose
Cooling System Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Cooling Hoses found
2008 Lincoln Mark LT Upper Hose Part Number: 4L3Z-8260-DA
$27.59 MSRP: $43.82You Save: $16.23 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose Assembly; Radiator Coolant Hose, Upper; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Manufacturer Note: Clamps Not Serviced Dealer To Improvise
- Position: Upper
- Base No.: 8260
- Item Weight: 2.00 Pounds
- Item Dimensions: 3.3 x 8.1 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-8260-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln Mark LT Lower Hose Part Number: 4L3Z-8286-BC
$24.05 MSRP: $38.18You Save: $14.13 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose Assembly; Radiator Coolant Hose, Lower; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Manufacturer Note: Clamps Not Serviced Dealer To Improvise
- Position: Lower
- Base No.: 8286
- Item Weight: 1.50 Pounds
- Item Dimensions: 4.2 x 4.9 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-8286-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln Mark LT Cooling Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Cooling Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Cooling Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln Mark LT Cooling Hose Parts Q&A
- Q: How to Maintain the Cooling Hose in the Coolant Crossover Manifold Assembly on a 5.4L (3V) Engine for a 2008 Lincoln Mark LT?A: The service process for the coolant crossover manifold assembly of the 5.4L (3V) engine requires intake manifold removal as the first step. First you should remove all the bolts securing the coolant crossover manifold assembly before taking out the assembly itself while you should tighten the new assembly to 10 Nm (89 lb-in) after assembly. The inspection of gaskets occurs at this time with a requirement to use new gaskets if old ones are detected. The cleaning process for gasket mating surfaces requires metal surface prep which must be done according to the packaging instructions. Reinstall the components after performing the reverse steps of removal.