How to Service the Rear Two-Piece Drive Shaft on 2008 Lincoln Mark LT?

You should start driveshaft servicing work on the vehicle when it remains in NEUTRAL gear and rests on a hoist. Mark index points between the driveshaft flange and pinion flange as well as the driveshaft and extension housing for use after disassembly. The installation requires four new bolts which should be tightened to 103 Nm (76 lb-ft). First discard all four driveshaft flange bolts before installation. Maintain caution when working because the driveshaft flange establishes a close fit with the flange pilot. Strikes against the driveshaft and other components should be completely prevented. A suitable tool should be used to separate the driveshaft flange from the flange pilot. By removing the driveshaft center bearing bolts first you will achieve proper access to lower the driveshaft which allows sliding the driveshaft slip yoke rearward off the output shaft before applying torque to 48 Nm (35 lb-ft). Connect the extension housing to avoid fluid leakage. The pinion flange pilots should face directly with the driveshaft flanges before installation by tightening bolts systematically through a cross pattern to maintain component safety. New bolt replacements may not be possible but original bolts can be treated with threadlock and sealer and the index markers from removal should be aligned before performing installation.

OEM 2008 Lincoln Mark LT Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Drive Shafts found

View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 5L3Z-4A376-A
$676.20 MSRP: $990.77
You Save: $314.57 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 2L1Z-4A376-AA
- Base No.: 4A376
- Item Weight: 21.00 Pounds
- Item Dimensions: 6.1 x 6.1 x 58.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-4A376-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 8L3Z-4R602-G
$997.88 MSRP: $1364.62
You Save: $366.74 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-UC, 5L3Z-4R602-U, 7L3Z-4R602-G
- Base No.: 4R602
- Item Weight: 51.80 Pounds
- Item Dimensions: 6.6 x 13.9 x 59.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft, Rear
Part Number: 8L3Z-4602-D
$731.25 MSRP: $1000.00
You Save: $268.75 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 5L3Z-4602-DB, 7L3Z-4602-D
- Base No.: 4602
- Item Weight: 48.30 Pounds
- Item Dimensions: 6.8 x 14.3 x 58.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft, Rear
Part Number: 8L3Z-4602-K
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 7L3Z-4602-K, 5L3Z-4602-XC
- Base No.: 4602
- Item Weight: 21.40 Pounds
- Item Dimensions: 9.8 x 13.3 x 54.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 8L3Z-4R602-F
$635.72 MSRP: $869.35
You Save: $233.63 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4R602-F
- Base No.: 4R602
- Item Weight: 50.00 Pounds
- Item Dimensions: 9.8 x 76.8 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 8L3Z-4R602-D
$747.00 MSRP: $1021.54
You Save: $274.54 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-RC, 6L3Z-4R602-G, 7L3Z-4R602-D
- Base No.: 4R602
- Item Weight: 50.40 Pounds
- Item Dimensions: 26.2 x 6.2 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 8L3Z-4R602-H
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-VC, 6L3Z-4R602-K, 7L3Z-4R602-H, 5L3Z-4R602-V, 5L3Z-4R602-VA
- Base No.: 4R602
- Item Weight: 59.10 Pounds
- Item Dimensions: 6.6 x 13.9 x 73.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 8L3Z-4R602-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7L3Z-4R602-B
- Base No.: 4R602
- Item Weight: 51.10 Pounds
- Item Dimensions: 6.8 x 14.2 x 61.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4R602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft, Rear
Part Number: 8L3Z-4602-G
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 7L3Z-4602-G
- Base No.: 4602
- Item Weight: 25.30 Pounds
- Item Dimensions: 8.9 x 13.3 x 57.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft, Rear
Part Number: 8L3Z-4602-C
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 4L3Z-4602-CB, 7L3Z-4602-C, 5L3Z-4602-CB
- Base No.: 4602
- Item Weight: 29.70 Pounds
- Item Dimensions: 8.5 x 13.3 x 57.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-4602-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Drive Shaft
Part Number: 7L3Z-4R602-J
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 5L3Z-4R602-WC, 5L3Z-4R602-W, 6L3Z-4R602-W
- Base No.: 4R602
- Item Weight: 54.60 Pounds
- Item Dimensions: 9.5 x 77.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-4R602-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2008 Lincoln Mark LT Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Mark LT Drive Shaft Parts Questions & Experts Answers

Q: How to Service the Rear Two-Piece Drive Shaft on 2008 Lincoln Mark LT?
A: You should start driveshaft servicing work on the vehicle when it remains in NEUTRAL gear and rests on a hoist. Mark index points between the driveshaft flange and pinion flange as well as the driveshaft and extension housing for use after disassembly. The installation requires four new bolts which should be tightened to 103 Nm (76 lb-ft). First discard all four driveshaft flange bolts before installation. Maintain caution when working because the driveshaft flange establishes a close fit with the flange pilot. Strikes against the driveshaft and other components should be completely prevented. A suitable tool should be used to separate the driveshaft flange from the flange pilot. By removing the driveshaft center bearing bolts first you will achieve proper access to lower the driveshaft which allows sliding the driveshaft slip yoke rearward off the output shaft before applying torque to 48 Nm (35 lb-ft). Connect the extension housing to avoid fluid leakage. The pinion flange pilots should face directly with the driveshaft flanges before installation by tightening bolts systematically through a cross pattern to maintain component safety. New bolt replacements may not be possible but original bolts can be treated with threadlock and sealer and the index markers from removal should be aligned before performing installation.