My Garage
Cart

OEM 2008 Lincoln Mark LT Fuel Pump Driver Module

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Driver Module found

  • 2008 Lincoln Mark LT Fuel Pump Driver Module Diagram - 5L8Z-9D370-A
    View related parts

    2008 Lincoln Mark LT Control Module Part Number: 5L8Z-9D370-A

    $98.10 MSRP: $190.40
    You Save: $92.30 (49%)
    ADD TO CART
    Product Specifications
    • Other Name: Control Unit; Fuel Pump Driver Module; Fuel Pump Housing; Fuel Pump Controller; Module
    • Replaces: 4L2Z-9D372-AA, 4L2Z-9D372-BA, 6L2Z-9D372-A, 7R3Z-9D372-BA, 4L2Z-9D372-A, 5L3Z-9D370-A
    • Base No.: 9D370
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 8.5 x 4.6 x 2.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5L8Z-9D370-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln Mark LT Submodels:
    • Base | 8 Cyl 5.4 L GAS

2008 Lincoln Mark LT Fuel Pump Driver Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Fuel Pump Driver Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Fuel Pump Driver Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Mark LT Fuel Pump Driver Module Parts Q&A

  • Q: How to service the Fuel Pump Driver Module (FPDM) on 2008 Lincoln Mark LT?
    A: The service process for Fuel Pump Driver Module (FPDM) starts with putting the vehicle in neutral position on a hoist then lowering the spare tire. Detach the electrical connector of the Fuel Pump Driver Module before removing all bolts which secure the module. Installation of the new Fuel Pump Driver Module requires bolt tightening to 10 Nm (89 lb-in) according to the removal procedure for correct assembly.