My Garage
Cart
Make sure this part fits

Ford 5L8Z-9D370-A
Control Module

2005-2010 Ford 5L8Z9D370A

Customer Questions & Expert Answers (11)
Ford 5L8Z-9D370-A Control Module
Ford 5L8Z-9D370-A Control Module
  • Part Description
    Control Unit; Fuel Pump Driver Module; Fuel Pump Housing
  • Base No.
    9D370
  • Replaces
    4L2Z-9D372-AA, 4L2Z-9D372-BA, 6L2Z-9D372-A, 7R3Z-9D372-BA, 4L2Z-9D372-A, 5L3Z-9D370-A
  • Manufacturer
    Ford
Make sure this part fits
$98.10 MSRP: $190.40
You Save: $92.30 (49%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.9D370
    Manufacturer Part Number5L8Z-9D370-A
    Part DescriptionControl Unit; Fuel Pump Driver Module; Fuel Pump Housing
    Other NamesFuel Pump Controller; Module
    Item Dimensions8.5 x 4.6 x 2.9 inches
    Item Weight1.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4L2Z-9D372-AA, 4L2Z-9D372-BA, 6L2Z-9D372-A, 7R3Z-9D372-BA, 4L2Z-9D372-A, 5L3Z-9D370-A
    ManufacturerFord
    SKU5L8Z-9D370-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2010 Ford ExplorerEddie Bauer, Limited, XLS, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2007-2010 Ford Explorer Sport TracLimited, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2005-2010 Ford MustangBase, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2006-2008 Lincoln Mark LTBase8 Cyl 5.4 L GAS
    2005-2006 Lincoln NavigatorBase, Luxury, Ultimate8 Cyl 5.4 L GAS
    2008-2010 Mercury MountaineerBase, Premier6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Do you think this 5L8Z-9D370-A will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 5L8Z-9D370-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to removing and installing the Fuel Pump Driver Module (FPDM) on Ford Mustang? Posted by Customer
    A:
    Installation and removal of the Fuel Pump Driver Module (FPDM) at the spare tire stowage compartment requires disconnecting the electrical connector and removing two securing bolts. After removal, the FPDM can be installed by reversing the removal steps while securing the bolts to a torque specification of 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    Q:
    Where is the fuel pump driver module (FPDM) located and how to remove and install on Ford Mustang? Posted by Customer
    A:
    The driver module of the fuel pump (FPDM) can be found in the spare tire storage compartment. Start with disconnecting the battery ground cable and proceed by separating the fuel pump driver module (FPDM) electrical connector. Detach the fuel pump driver module (FPDM) through removal of its two securing bolts followed by the module extraction step. To install the parts, you must tighten both bolts to 10 Nm (89 lb-in) before executing the reverse removal process for installation completion.
    Posted by FordPartsDeal Specialist
    Q:
    How to properly service and repair the Fuel Pump Driver Module in a Lincoln Navigator? Posted by Customer
    A:
    The Fuel Pump Driver Module service starts by hoisting the vehicle to NEUTRAL position and disconnecting ground from the battery. The Fuel Pump Driver Module is located at the top of the left-hand frame rail next to the fuel tank filler pipe, so its electrical connector must be removed first. The next step requires removal of the bolts which secure the Fuel Pump Driver Module before removing the module. Carry out installation by torquing the bolts to 10 Nm (89 lb-in) using the same removal technique to finish the process.
    Posted by FordPartsDeal Specialist
    Q:
    How to properly maintain the Fuel Pump Driver Module in a Lincoln Mark LT? Posted by Customer
    A:
    Service of the Fuel Pump Driver Module (FPDM) starts by placing the vehicle into NEUTRAL on a hoist while lowering the spare tire. Gather the bolts that secure the Fuel Pump Driver Module and disconnect its electrical connector preceding module removal. Perform the installation by following the removal steps in reverse order while torquing the bolts to 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    Q:
    How to service the Fuel Pump Driver Module (FPDM) on Lincoln Mark LT? Posted by Customer
    A:
    The service process for Fuel Pump Driver Module (FPDM) starts with putting the vehicle in NEUTRAL position on a hoist then lowering the spare tire. Detach the electrical connector of the Fuel Pump Driver Module before removing all bolts which secure the module. Installation of the new Fuel Pump Driver Module requires bolt tightening to 10 Nm (89 lb-in) according to the removal procedure for correct assembly.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the Fuel Pump Driver Module (FPDM) on Lincoln Navigator? Posted by Customer
    A:
    You should begin servicing the Fuel Pump Driver Module (FPDM) by having the vehicle in NEUTRAL position on a hoist while removing the battery ground cable. Connectors and hardware bolts leading to the Fuel Pump Driver Module (FPDM) are situated near the fuel tank filler pipe on the top of the left-hand frame rail. Disconnect the electrical connector and remove the bolts to remove the FPDM. Install the new FPDM by tightening its bolts to 10 Nm (89 lb-in) then perform the reverse steps for removal to finish the installation process.
    Posted by FordPartsDeal Specialist
    Q:
    What should be ensured when installing the FPDM for the 2008 Ford Explorer Sport Trac? Posted by Customer
    A:
    Tighten the bolts to 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    What is the first step to service and repair the Fuel Pump Driver Module (FPDM) for the 2009 Ford Explorer Sport Trac? Posted by Customer
    A:
    Position the vehicle on a hoist with it in NEUTRAL.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    Where is the fuel pump driver module (FPDM) located for the 2008 Ford Mustang? Posted by Customer
    A:
    The FPDM is located in the spare tire stowage compartment.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fuel Pump Driver Module
    Q:
    What should be done after installing the new FPDM for the 2006 Lincoln Mark LT? Posted by Customer
    A:
    Reverse the removal procedure for reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fuel Pump Driver Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 5L8Z-9D370-A, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 5L8Z-9D370-A Control Module. It is sometimes referred to as Ford Fuel Pump Driver Module. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 5L8Z9D370A Control Module. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery