My Garage
Cart

OEM 2008 Lincoln MKX Exhaust Pipe

Exhaust Tail Pipe
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Pipe found

  • 2008 Lincoln MKX Exhaust Pipe - 9T4Z-5G274-A
    2008 Lincoln MKX Exhaust Pipe Diagram - 9T4Z-5G274-A
    View related parts

    2008 Lincoln MKX Exhaust Pipe, Rear Part Number: 9T4Z-5G274-A

    $738.79 MSRP: $980.15
    You Save: $241.36 (25%)
    ADD TO CART
    Product Specifications
    • Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Rear; Exhaust Y Pipe; Tail Pipe; Front Pipe; Intermediate Pipe; Extension Pipe
    • Position: Rear
    • Replaces: 7T4Z-5G274-AA, 7T4Z-5G203-AA, 8T4Z-5G274-A, 8T4Z-5G203-B, 8T4Z-5G203-A
    • Base No.: 5G274
    • Item Weight: 12.40 Pounds
    • Item Dimensions: 9.1 x 4.2 x 23.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 9T4Z-5G274-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln MKX Submodels:
    • Base | 6 Cyl 3.5 L GAS

2008 Lincoln MKX Exhaust Pipe

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKX Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKX Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKX Exhaust Pipe Parts Q&A

  • Q: How to Service and Repair an Exhaust Pipe with a Flexible Pipe on 2008 Lincoln MKX?
    A: The first step for exhaust flexible pipe fixing conducts on a vehicle positioned on a hoist with neutral mode engaged. The exhaust Y-pipe requires removal of two nuts along with their corresponding gaskets engaged to the exhaust flexible pipe. New fasteners along with gaskets should be used for reinstallation while cleaning the flange faces properly to achieve sealing before torquing nuts to 40 Nm (30 lb-ft). Take out the Torca(R) clamp then split the two exhaust flexible pipe isolators before extracting the exhaust flexible pipe. The installation procedure requires the use of new gasket and nuts while performing the process in reverse order. Start the engine to determine if any exhaust leakage is detected during the last step.

Related 2008 Lincoln MKX Parts