FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKZ Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2008 Lincoln MKZ Rotor, Rear Part Number: 9E5Z-2C026-B
$81.21 MSRP: $124.98You Save: $43.77 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 9E5Z-2C026-A
- Base No.: 2C026
- Item Weight: 10.50 Pounds
- Item Dimensions: 2.7 x 11.9 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9E5Z-2C026-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Rotor, Front Part Number: 6U2Z-1V125-H
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaced by: 6U2Z-1V125-K
- Item Weight: 20.10 Pounds
- Item Dimensions: 2.9 x 14.0 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U2Z-1V125-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKZ Brake Disc Parts Q&A
- Q: How to Remove and Replace the Front Brake Disc on 2008 Lincoln MKZ?A: The procedure for removing and replacing front brake rotor/disc begins with tire and wheel removal. The suspension of the brake caliper from the brake hose during this operation also needs care since it leads to damage. Using mechanic's wire support the brake caliper assembly by setting aside the brake caliper together with pads and anchor plate while removing its anchor plate bolts. Before closing the brake caliper install the bolts with a torque of 90 Nm (66 lb-ft). The two brake disc screws need removal before tightening them to 20 Nm (15 lb-ft) for installation. You must inspect the brake caliper hose for twisting when reinstalling it after brake disc removal. Before applying anti-seize lubricant it is crucial to inspect the brake disc-to-hub mounting surface while making sure the anti-seize material stays away from wheel studs. You should then perform the opposite actions to accomplish the installation process.