How to service and repair front brake pads on 2008 Lincoln Town Car?

The service process for front brake pads begins with the use of manufacturer-approved clean brake fluid while discarding drained fluid to maintain system quality. The brake master cylinder reservoir requires its fluid level checked while excess fluid needs removal until reaching half its capacity. Uninstall the wheel along with the tire. Avoid inserting a tool into the caliper sight hole to retract pistons since this could lead to damage and never permit the brake caliper to suspend from the brake hose for protection of the hose. The mechanic's wire should support the caliper when installing it aside while the two guide pin bolts receive a torque of 36 Nm (27 lb-ft) before replacement. Take out both the pads and stainless steel slides from the anchor plate while discarding the slides. Take precautions when deploying the caliper piston because damage can occur to the piston alongside the boots. A worn brake pad and appropriate tool must compress the disc brake caliper pistons to install new brake pads correctly. The procedure concludes with new slides installation followed by brake master cylinder reservoir filling with clean specific fluid then reinstalling the brake master cylinder cap. Complete the brake operation checks by engaging the brakes several times to ensure functional correctness.

OEM 2008 Lincoln Town Car Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pads found

View related parts
2008 Lincoln Town Car Brake Pads Part Number: 6W1Z-2001-B
$45.02 MSRP: $61.26
You Save: $16.24 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe; Disc Brake Pad Kit; Disc Brake Pad Set
- Replaces: 3W1Z-2001-CA
- Base No.: 2001
- Item Weight: 6.20 Pounds
- Item Dimensions: 3.8 x 4.2 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2001-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2008 Lincoln Town Car Brake Pads, Rear Part Number: 4U2Z-2V200-CA
$44.51 MSRP: $66.65
You Save: $22.14 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 4W1Z-2200-AA, 6W1Z-2200-AA, BRF-1040
- Base No.: 2200
- Item Weight: 3.00 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V200-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2008 Lincoln Town Car Brake Pads, Front Part Number: 4U2Z-2V001-A
$44.51 MSRP: $66.65
You Save: $22.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 3W1Z-2001-AA, BR-931-B, 4U2Z-2V001-BA, 6W1Z-2001-A, BRF-931-A, G2MZ-2V001-Z
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.8 x 5.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2008 Lincoln Town Car Brake Pads Part Number: 2U2Z-2V200-EB
Product Specifications
- Other Name: Pad - Brake; Disc Brake Pad Set
- Manufacturer Note: Rear disc - Motorcraft SuperDuty Brake Pads
- Replaces: 6W1Z-2200-BA, 3W1Z-2200-BA, BRF-1424
- Base No.: 2V200
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.7 x 5.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-2V200-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Lincoln Town Car Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Town Car Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Town Car Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Town Car Brake Pads Parts Q&A

Q: How to service and repair front brake pads on 2008 Lincoln Town Car?
A: The service process for front brake pads begins with the use of manufacturer-approved clean brake fluid while discarding drained fluid to maintain system quality. The brake master cylinder reservoir requires its fluid level checked while excess fluid needs removal until reaching half its capacity. Uninstall the wheel along with the tire. Avoid inserting a tool into the caliper sight hole to retract pistons since this could lead to damage and never permit the brake caliper to suspend from the brake hose for protection of the hose. The mechanic's wire should support the caliper when installing it aside while the two guide pin bolts receive a torque of 36 Nm (27 lb-ft) before replacement. Take out both the pads and stainless steel slides from the anchor plate while discarding the slides. Take precautions when deploying the caliper piston because damage can occur to the piston alongside the boots. A worn brake pad and appropriate tool must compress the disc brake caliper pistons to install new brake pads correctly. The procedure concludes with new slides installation followed by brake master cylinder reservoir filling with clean specific fluid then reinstalling the brake master cylinder cap. Complete the brake operation checks by engaging the brakes several times to ensure functional correctness.