How to Properly Maintain and Fix the Oil Pan on 2008 Lincoln Town Car?

In order to fix the oil pan, make sure that the car is in neutral on a hoist. Take out the front crossmember, empty the oil and remove the oil pan bolts. Wipe surfaces using a plastic tool, apply sealant and reassemble. Tighten bolts, re-assemble parts, and fill with oil, and check to see if there are leaks.

OEM 2008 Lincoln Town Car Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan found

View related parts
2008 Lincoln Town Car Oil Pan Part Number: 3W7Z-6675-BC
$87.79 MSRP: $127.78
You Save: $39.99 (32%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Replaces: 3W7Z-6675-BB
- Base No.: 6675
- Item Weight: 12.30 Pounds
- Item Dimensions: 8.7 x 22.5 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-6675-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Lincoln Town Car Oil Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Town Car Oil Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Town Car Oil Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Town Car Oil Pan Parts Q&A

Q: How to Properly Maintain and Fix the Oil Pan on 2008 Lincoln Town Car?
A: In order to fix the oil pan, make sure that the car is in neutral on a hoist. Take out the front crossmember, empty the oil and remove the oil pan bolts. Wipe surfaces using a plastic tool, apply sealant and reassemble. Tighten bolts, re-assemble parts, and fill with oil, and check to see if there are leaks.