FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Milan Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
2008 Mercury Milan Water Pump Part Number: EU2Z-8501-D
$135.24 MSRP: $218.18You Save: $82.94 (39%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 3M4Z-8501-BG, 5M8Z-8501-A, 3M4Z-8501-BJ, 5M8Z-8501-B, PW-481, PW-437, PW-440
- Base No.: 8501
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.4 x 6.3 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EU2Z-8501-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Water Pump Part Number: 4S4Z-8501-E
$49.92 MSRP: $79.27You Save: $29.35 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 6M8Z-8501-AC, PW-447, 1S7Z-8501-AK, 4S4Z-8501-AA, 4S4Z-8501-D, PW-465
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-8501-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Milan Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Milan Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Milan Water Pump Parts Q&A
- Q: How to service the water pump on a 2.3L engine on 2008 Mercury Milan?A: Service procedures for the coolant pump on a 2.3L engine start with hoisting the vehicle with neutral transmission and cooling system drainage. Unlock the three bolts on the coolant pump pulley then take away the accessory drive belt and the three bolts from the coolant pump pulley before retightening them to 20 Nm (15 lb-ft) after replacement. First detach the three bolts from the coolant pump and remove it while discarding the O-ring seal. Fasten the new pump bolts while applying 10 Nm torque (89 lb-inch) before using clean engine coolant to lubricate the O-ring seal. You should complete the service by filling and bleeding the cooling system.