How to Service the Power Steering Reservoir on 2008 Mercury Mountaineer?

In order to service the power steering reservoir, a suction must be used to empty the fluid, a securing bolt (tighten to 9 Nm) removed. Unplug the supply and cooler hoses, dismount the reservoir and repeat the same steps in reverse and fill the system with the right fluid.

OEM 2008 Mercury Mountaineer Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2008 Mercury Mountaineer Power Steering Pump Reservoir Part Number: 8L2Z-3E764-A
$17.06 MSRP: $24.20
You Save: $7.14 (30%)
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Power Steering Reservoir; Reservoir
- Base No.: 3E764
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.8 x 6.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-3E764-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Mercury Mountaineer Power Steering Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Power Steering Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Power Steering Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mountaineer Power Steering Reservoir Parts Q&A

Q: How to Service the Power Steering Reservoir on 2008 Mercury Mountaineer?
A: In order to service the power steering reservoir, a suction must be used to empty the fluid, a securing bolt (tighten to 9 Nm) removed. Unplug the supply and cooler hoses, dismount the reservoir and repeat the same steps in reverse and fill the system with the right fluid.