How to service the rear door window regulator on 2008 Mercury Mountaineer?

Servicing the rear door window regulator demands the removal of rear door trim panel then the rear door speaker and interior moulding. The next step requires removal of the rear door weather shield. Avoid letting the glass bracket hole expand when you remove rivets because a damaged regulator may produce a loose rivet which generates clicking sounds. Drilling out the glass-to-regulator rivets requires a drill bit with 4.5 mm diameter (0.1772 inches) to reach the rivets from inside the position where the rear door window glass is placed. Apply taped to the rear door window glass while it faces fully upward before you disconnect the electrical connector of the window regulator motor. When installing the rear window regulator remove its mounting nuts then reinstate these fasteners with 10Nm (89lb-in) torque setting. The next step requires removing three window regulator motor bracket nuts following installation by tightening them to 10 Nm (89 lb-in). Reinstall the new components by going through the reversal of the removal procedure after you remove the window regulator assembly.

OEM 2008 Mercury Mountaineer Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Window Regulators found

View related parts
2008 Mercury Mountaineer Window Regulator, Front Passenger Side Part Number: 8L2Z-7823200-AA
$79.65 MSRP: $108.39
You Save: $28.74 (27%)
ADD TO CART
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Front Right; Power Window Motor and Regulator Assembly; Regulator Assembly
- Manufacturer Note: Complete Assembly, Includes Regulator, Motor And Attaching Components
- Position: Front Passenger Side
- Base No.: <23200
- Item Weight: 6.20 Pounds
- Item Dimensions: 13.8 x 4.6 x 28.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-7823200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Window Regulator, Rear Passenger Side Part Number: 6L2Z-7827000-BA
$100.14 MSRP: $136.28
You Save: $36.14 (27%)
ADD TO CART
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Window Regulator, Rear Right; Window Assembly; Regulator Assembly
- Position: Rear Passenger Side
- Replaces: 6L2Z-7827000-AA
- Base No.: <27000
- Item Weight: 4.90 Pounds
- Item Dimensions: 16.5 x 4.7 x 26.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-7827000-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Mercury Mountaineer Window Regulator, Rear Driver Side Part Number: 6L2Z-7827001-BA
Product Specifications
- Other Name: Regulator And Motor Assembly - Window; Window Regulator, Rear Left; Window Assembly; Regulator Assembly
- Position: Rear Driver Side
- Replaces: 6L2Z-7827001-AA
- Base No.: <27008
- Item Weight: 5.00 Pounds
- Item Dimensions: 17.2 x 4.7 x 26.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-7827001-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Mercury Mountaineer Window Regulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Window Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Window Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mountaineer Window Regulator Parts Q&A

Q: How to service the rear door window regulator on 2008 Mercury Mountaineer?
A: Servicing the rear door window regulator demands the removal of rear door trim panel then the rear door speaker and interior moulding. The next step requires removal of the rear door weather shield. Avoid letting the glass bracket hole expand when you remove rivets because a damaged regulator may produce a loose rivet which generates clicking sounds. Drilling out the glass-to-regulator rivets requires a drill bit with 4.5 mm diameter (0.1772 inches) to reach the rivets from inside the position where the rear door window glass is placed. Apply taped to the rear door window glass while it faces fully upward before you disconnect the electrical connector of the window regulator motor. When installing the rear window regulator remove its mounting nuts then reinstate these fasteners with 10Nm (89lb-in) torque setting. The next step requires removing three window regulator motor bracket nuts following installation by tightening them to 10 Nm (89 lb-in). Reinstall the new components by going through the reversal of the removal procedure after you remove the window regulator assembly.