My Garage
Cart
Make sure this part fits

Ford 6L2Z-7827001-BA
Window Regulator, Rear Driver Side

2002-2010 Ford 6L2Z7827001BA

Customer Questions & Expert Answers (19)
Ford 6L2Z-7827001-BA Window Regulator, Rear Driver Side
  • Part Description
    Regulator And Motor Assembly - Window; Window Regulator, Rear Left; Window Assembly
  • Base No.
    <27008
  • Position
    Rear Driver Side
  • Replaces
    6L2Z-7827001-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2010 Ford ExplorerEddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2007-2010 Ford Explorer Sport TracLimited, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    2003-2005 Lincoln AviatorBase8 Cyl 4.6 L GAS
    2002-2010 Mercury MountaineerBase, Convenience, Luxury, Premier6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6L2Z-7827001-BA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6L2Z-7827001-BA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How should the glass be removed for the 2004 Ford Explorer? Posted by Customer
    A:
    Pull the glass out through the top inboard side of the door.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the torque specification for the rear window regulator mounting nuts upon installation for the 2009 Ford Explorer Sport Trac? Posted by Customer
    A:
    Tighten them to 10 Nm (89 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to service the rear door window regulator and motor for the 2002 Ford Explorer? Posted by Customer
    A:
    Begin by removing the door-mounted speaker and the watershield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to service and repair the rear window regulator for the 2009 Ford Explorer? Posted by Customer
    A:
    Begin by removing the cab rear panel and positioning the insulator aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the torque specification for the bolts upon reinstallation for the 2006 Ford Explorer? Posted by Customer
    A:
    Ensure the bolts are tightened to 7 Nm (62 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be removed after the rear door trim panel for the 2005 Ford Explorer? Posted by Customer
    A:
    Remove the rear door speaker and the interior moulding.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What could happen if the hole in the glass bracket enlarges for the 2008 Ford Explorer? Posted by Customer
    A:
    It could lead to a loose new rivet, causing a clicking noise.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    How do you complete the installation for the 2008 Ford Explorer Sport Trac? Posted by Customer
    A:
    Reverse the removal procedure and initialize the rear window regulator motor, ensuring proper function of the power rear window system after any repairs or component replacements.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be ensured before removing the window regulator motor for the 2003 Ford Explorer? Posted by Customer
    A:
    Ensure the glass is secured in the fully up position with tape.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after removing the front door window regulator for the 2005 Lincoln Aviator? Posted by Customer
    A:
    Reverse the removal procedure for reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to service the front door window regulator for the 2008 Mercury Mountaineer? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    How should the front door glass be secured for the 2007 Mercury Mountaineer? Posted by Customer
    A:
    Secure the front door glass in the full up position with tape.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be disconnected next for the 2005 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the window regulator motor electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    How should the front door window glass be positioned when removing the regulator assembly and motor for the 2004 Mercury Mountaineer? Posted by Customer
    A:
    Secure the front door glass in the full up position with tape.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    How is the window glass removed for the 2003 Mercury Mountaineer? Posted by Customer
    A:
    Pull it out through the top inboard side of the door.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the next step after removing the speaker and moulding for the 2006 Mercury Mountaineer? Posted by Customer
    A:
    Take off the rear door weather shield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to service and repair the front door window regulator and motor for the 2002 Mercury Mountaineer? Posted by Customer
    A:
    Position the front door window glass to the half-open position.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the final step in the process for the 2007 Ford Explorer Sport Trac? Posted by Customer
    A:
    Remove the window regulator assembly and reverse the removal procedure to install the new components.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Window Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Window Regulator, Rear Driver Side 6L2Z-7827001-BA Designed for Proper Fit and Performance

The Ford part 6L2Z-7827001-BA Window Regulator, Rear Driver Side as a genuine Ford Window Regulator component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6L2Z-7827001-BA Window Regulator, Rear Driver Side is used with Ford Explorer, Explorer Sport Trac vehicles and Mercury Mountaineer models and Lincoln Aviator models. The original Ford part will bear the manufacturer part number: 6L2Z-7827001-BA and where it is made at Ford. It has been specifically developed to fit the Rear Driver Side and has the code: <27008.
This component has dimensions of 17.2 x 4.7 x 26.6 inches and its weight is approximately 5.00 Pounds. The part 6L2Z7827001BA is available in New condition while meeting the standards of the product rating. The Regulator And Motor Assembly - Window; Window Regulator, Rear Left; Window Assembly belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6L2Z-7827001-BA can be known as Regulator Assembly, and it replaces 6L2Z-7827001-AA. The inventory reference for this item is SKU: 6L2Z-7827001-BA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.