FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Sable Engine Control Module
Engine Control Computer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Engine Control Modules found
2008 Mercury Sable PCM Part Number: 8G1Z-12A650-LHRM
$570.11 MSRP: $841.50You Save: $271.39 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 8G1Z-12A650-JF, 8F9Z-12A650-CH, 8F9Z-12A650-CG, 8G1Z-12A650-JE, 8G1Z-12A650-LG, 8G1Z-12A650-LE, 8G1Z-12A650-LF, 8G1Z-12A650-JG, 8F9Z-12A650-CE, 8F9Z-12A650-CF, 8G1Z-12A650-JH, 8G1Z-12A650-LH, 8G1Z-12A650-LD
- Base No.: 12A650
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.2 x 4.6 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-12A650-LHRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Sable PCM Part Number: 8G1Z-12A650-HFRM
$574.70 MSRP: $848.30You Save: $273.60 (33%)Product Specifications- Other Name: Reman Module - Engine Control - EEC; Engine Control Module (ECM); Engine Control Module; ECM
- Replaces: 8G1Z-12A650-HE, 8U7Z-12A650-AMA, 8U7Z-12A650-AMB, 8G1Z-12A650-HF, 8F9Z-12A650-BF, 8F9Z-12A650-BE, 8U7Z-12A650-ANA, 8U7Z-12A650-ANB
- Base No.: 12A650
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.2 x 4.5 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-12A650-HFRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Sable Engine Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Sable Engine Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Sable Engine Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Sable Engine Control Module Parts Q&A
- Q: How to remove and replace the Engine Control Module (ECM) on 2008 Mercury Sable?A: The first step before removing and installing the Powertrain Control Module (PCM) requires performing module configuration retrieval exactly as explained in the Programmable Module Installation procedure. Start by taking off the cowl panel grille after which you should disconnect the three PCM electrical connectors. You need to remove the PCM by taking out its two securing nuts first and after that pull out the module from its place. Place the PCM into position before fastening it with the two nuts to a torque of 5 Nm (44 lb-in). Connect the three PCM electrical connectors to install the cowl panel grille. The procedures for both module configuration restoration and passive anti-theft system (PATS) reprogramming are available in the Programmable Module Installation guide and should be followed post-installation.