How to Service and Repair a Wiper Switch on a Steering Column on 2008 Mercury Sable?

You should start wiper switch service and repair by removing the three screws which fasten the steering column shroud. First detach and remove both the upper steering column shroud along with the lower shroud. Disconnect the electrical connector from the multi-function switch followed by removing the two screws that secure the switch. Follow the removal procedure in reverse when installing the new switch by tightening all screws to 3 Nm (27 lb-inch).

OEM 2008 Mercury Sable Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2008 Mercury Sable Wiper Switch
Part Number: 5G1Z-17A553-AAB
Product Specifications
- Other Name: Switch Assembly; Windshield Wiper Switch; Windshield Washer Switch
- Base No.: 17A553
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.6 x 2.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5G1Z-17A553-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS

2008 Mercury Sable Wiper Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Sable Wiper Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Sable Wiper Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Sable Wiper Switch Parts Questions & Experts Answers

Q: How to Service and Repair a Wiper Switch on a Steering Column on 2008 Mercury Sable?
A: You should start wiper switch service and repair by removing the three screws which fasten the steering column shroud. First detach and remove both the upper steering column shroud along with the lower shroud. Disconnect the electrical connector from the multi-function switch followed by removing the two screws that secure the switch. Follow the removal procedure in reverse when installing the new switch by tightening all screws to 3 Nm (27 lb-inch).