How to Service and Repair the Front ABS Sensor on 2009 Ford Crown Victoria?

A technician should start the front ABS sensor service and repair by acquiring all needed tools and equipment. The wheel hub assembly needs removal in accordance with wheel and tire maintenance procedures. Treatment of each component needs delicacy to prevent any damage. The first step requires removal of the wheel hub before disconnecting the electrical connector that connects to the ABS sensor. Apply an appropriate socket to unscrew the sensor until it releases from its mounting position. Put the new ABS sensor in place by following the procedure in reverse while making sure the sensor is well fastened along with a proper electrical connector attachment. Follow the manufacturer specifications to position and tighten every component of the wheel hub assembly during its final reassembly process.

OEM 2009 Ford Crown Victoria ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2009 Ford Crown Victoria ABS Sensor
Part Number: 6W1Z-2C204-A
Product Specifications
- Other Name: Wire Assembly - Jumper; Wheel Bearing and Hub Assembly; Wheel Bear & Hub Assembly; Speed Sensor; Front Speed Sensor
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 4.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-2C204-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Crown Victoria ABS Sensor, Rear
Part Number: 8W1Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear
- Replaces: 6W1Z-2C190-A, 5W1Z-2C190-AA
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8W1Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Crown Victoria Submodels:
- Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Ford Crown Victoria ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Crown Victoria ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Crown Victoria ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Crown Victoria ABS Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Front ABS Sensor on 2009 Ford Crown Victoria?
A: A technician should start the front ABS sensor service and repair by acquiring all needed tools and equipment. The wheel hub assembly needs removal in accordance with wheel and tire maintenance procedures. Treatment of each component needs delicacy to prevent any damage. The first step requires removal of the wheel hub before disconnecting the electrical connector that connects to the ABS sensor. Apply an appropriate socket to unscrew the sensor until it releases from its mounting position. Put the new ABS sensor in place by following the procedure in reverse while making sure the sensor is well fastened along with a proper electrical connector attachment. Follow the manufacturer specifications to position and tighten every component of the wheel hub assembly during its final reassembly process.